Clutch Not Engaging

[aNotchAbove]

I just finished putting the motor in my fox and my clutch doesn't seem to want to engage. I put it into gear and the clutch pedal comes all the way out and nothing happens. I did notice that the clutch feels a little different than it did before I swapped motors. Feels a little harder to push down initially, but it feels much smoother than before and much like my buddies fox with the same clutch so I thought nothing of it. It's a king cobra clutch with an unknown cable and freshly resurfaced flywheel.

Any idea what's up? I'm kind of hoping its just a cable/adjustment issue but let me know what you think.

 

[HISSIN50]

Is the fork very preloaded?

 

[aNotchAbove]

Is the fork very preloaded?

How could I determine this?

 

[393 notch]

Try pulling up on the clutch pedal (hard)

 

[HISSIN50]

How could I determine this?

Slacken the cable then retighten it to zero lash.

 

[90topdown]

What do you mean by "zero lash"???

I am having a problem getting mine adjusted properly.

 

[HISSIN50]

What do you mean by "zero lash"???

I am having a problem getting mine adjusted properly.

No slack in the cable and no preload. You've just barely removed all the slack in other words.

 

[sgw_88FoxGT]

Try pulling up on the clutch pedal (hard)

Is this to activate the self-adjusting cable tightening mechanism?

 

[HISSIN50]

Is this to activate the self-adjusting cable tightening mechanism?

Yes.