• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch problems -

  • Thread starter Thread starter 89LXRAGTOP
  • Start date Start date May 27, 2010

89LXRAGTOP

Member
Feb 1, 2002
50
0
6
Farmingdale, NY
May 27, 2010
#1
  • May 27, 2010
  • #1
Here's my story, sorry in advance for it's length!
The clutch in my 89 notch is a bit on the 'old' side (close to 10 years since it's been done) - It's a Motorsport HD clutch, with an aluminum quandrant and adjustable cable. Other than a really stiff pedal, it's been working fine - no noise, no chatter, no slippage. The other night on the way home coming to a stoplight as I engaged the clutch it started squealing really loudly, and the car acted like it wanted to stall.. As the light turned, I gave it some gas and put it back in gear (without any problem or grinding) and as soon as it was back in gear and I was under steam again, the squealing went away.. No squealing from continued shifts up to highway speeds either. As soon as I got to another light, same thing, almost stalling, ear shattering squealing coming from under the car (right where the clutch is), and again, gas, gear and squealing stops.
Anyone ever encounter this? I did check my belt on the outside chance that was making the noise, but it's fine - It only exhibits these symptoms when coming to a stop or idle.... I'm thinking maybe a seized bearing? Would I do damage if I tried to drive it to my mechanic?
What do you guys think? Thanks in advance....
Nick
 

87GT Drop Top

Member
May 1, 2009
500
3
17
South Florida
May 27, 2010
#2
  • May 27, 2010
  • #2
Sounds like the release bearing.
 

89LXRAGTOP

Member
Feb 1, 2002
50
0
6
Farmingdale, NY
May 27, 2010
#3
  • May 27, 2010
  • #3
Thanks for the reply! Do you think driving the car like this a short distance would damage anything that isn't going to be replaced anyway with a clutch swap?
 

87GT Drop Top

Member
May 1, 2009
500
3
17
South Florida
May 27, 2010
#4
  • May 27, 2010
  • #4
If the bearing gets too bad it could tear up the front shaft on the transmission.
 

89LXRAGTOP

Member
Feb 1, 2002
50
0
6
Farmingdale, NY
May 27, 2010
#5
  • May 27, 2010
  • #5
Ouch! Don't want that...
Thanks again...
 

CDQICKGT

New Member
Jan 25, 2006
229
0
0
fort hood, tx
May 28, 2010
#6
  • May 28, 2010
  • #6
87GT Drop Top said:
If the bearing gets too bad it could tear up the front shaft on the transmission.
Click to expand...

it wont mess up the tranny input shaft. It WILL eat up, or possibley seize to the bearing sleeve that is over the shaft. not a big deal to replace though, they are pretty cheap from late model resto.
 

87GT Drop Top

Member
May 1, 2009
500
3
17
South Florida
May 28, 2010
#7
  • May 28, 2010
  • #7
CDQICKGT said:
it wont mess up the tranny input shaft. It WILL eat up, or possibley seize to the bearing sleeve that is over the shaft. not a big deal to replace though, they are pretty cheap from late model resto.
Click to expand...

I didn't know that sleeve was a seperate piece.
 

89LXRAGTOP

Member
Feb 1, 2002
50
0
6
Farmingdale, NY
Jun 2, 2010
#8
  • Jun 2, 2010
  • #8
Thanks for the help guys - it ended up being the throwout bearing. Pretty much came out in pieces.
 

87GT Drop Top

Member
May 1, 2009
500
3
17
South Florida
Jun 2, 2010
#9
  • Jun 2, 2010
  • #9
Nice!!
 
You must log in or register to reply here.

Similar threads

Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
812
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
M
85 Capri 5.0 transmission rattle
  • Mamaclean
  • May 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
242
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 17, 2026
Mamaclean
M
S
Drivetrain Downshifting from 3rd to 2nd issue
  • Scott_S
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech Oct 12, 2026
limp
D
Mustang not starting
  • Dawry Ramos
  • Sep 12, 2026
  • 2015 - 2023 Specific Tech
Replies
10
Views
380
2015 - 2023 Specific Tech Oct 3, 2026
Dawry Ramos
D
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
880
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?