• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch Quadrant

  • Thread starter Thread starter toofastfiveoh
  • Start date Start date Mar 22, 2006
T

toofastfiveoh

New Member
Oct 8, 2001
23
0
0
Mar 22, 2006
#1
  • Mar 22, 2006
  • #1
The clutch quadrant just went out on my '90 GT. I am wondering if anyone knows how bad this is to replace and any tips on fixing it. Also if anyone knows a good replacement quadrant to use, that would be appreciated. Thanks
 

dragnazz5.0

My "0" key d0esn't w0rk, s0 I have t0 use the zer0
Nov 19, 2005
815
5
18
mooresville, nc
Mar 22, 2006
#2
  • Mar 22, 2006
  • #2
http://50stangs.com/techarticles/clutchcableadjustment.html
check out that website from jeremy (v8only). probably the best info out there
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Mar 22, 2006
#3
  • Mar 22, 2006
  • #3
If it's the stock quadrant and you're looking to replace it with an aftermarket, then you'll need to replace the quadrant and install a firewall adjuster.

You other option (of course) would to be to replace the quadrant and prawl with a new (or used) OEM piece.

When I did mine, I spent approx 2 hours to do the swap. Its not bad so long as you go into the project knowing that you're going to have the patience to look at it all thoroughly and take your time disassembling the old stuff and putting on the new stuff. Getting frustrated because of the tight spaces makes the job suck.

I used the Maximum Motorsports OEM cable, quadrant, and firewall adjuster. They work great, no complaints. The quadrant is damned near stock in action and doesn't make for a hard to push pedal like many of the quick release quadrants do. I posted this the other day but had I to do it over again, I would have put a Fiore Micro-Click firewall adjuster in as opposed to the MM piece. It has no friction ring (making it easier to turn) and also has a nice knurled grip for grabbing onto to make adjustment. The ball bearing locking feature ensures it stays where you put it. My adjuster is a little difficult to get to because of where my blower sits. Having the Fiore I think, would just have made it easier for me to adjust when I'm only able to get 2 fingers on it. The MM adjuster is still a nice piece and works well though.
 
T

toofastfiveoh

New Member
Oct 8, 2001
23
0
0
Mar 22, 2006
#4
  • Mar 22, 2006
  • #4
Thanks man. Thats a huge help
 
You must log in or register to reply here.

Similar threads

Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
895
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
4
Drivetrain Wilwood Clutch and Brake Pedal Combo Installation - Help
  • 427stang
  • Jul 8, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
127
Fox 5.0 Mustang Tech Jul 8, 2026
427stang
4
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
555
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
330
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Engine Which fan clutch ?
  • AnthonyA1234
  • Jun 22, 2026
  • Fox 5.0 Mustang Tech
Replies
19
Views
612
Fox 5.0 Mustang Tech Sep 19, 2026
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?