• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

CLUTCH SQUEALS

  • Thread starter Thread starter cmb91LX
  • Start date Start date Apr 21, 2004

cmb91LX

New Member
Apr 20, 2004
432
0
0
Memphis
Apr 21, 2004
#1
  • Apr 21, 2004
  • #1
I am having a problem with both my 5 liter car and 99 GT. I inherited the problem upon purchase of the 91. After changing to a supposed KING COBRA( says Valeo) clutch purchased from the UPR booth at last years WFC and a Steeda adjustable quadrant and cable the car squeals at idle and under slight acceleration. If I barely put force and I mean barely on the clutch pedal the squeal will stop at idle. Also the clutch pedal vibrates and rumbles real bad. We have adjusted the cable at the firewall and at the fork and cannot get the shake and squeal out of the clutch pedal. Any insight on what this is?
 

Gravel

Member
Mar 17, 2004
216
0
16
Bellingham WA
Apr 21, 2004
#2
  • Apr 21, 2004
  • #2
The throw out bearing is dragging the pressure plate fingers slightly, this is causing the noise and the pedal movement..
Did you lube the face of the t/o bearing lightly? Hard to say how you are going to best fix it with it already installed unless you can get in to it through the fork hole..
 

cmb91LX

New Member
Apr 20, 2004
432
0
0
Memphis
Apr 21, 2004
#3
  • Apr 21, 2004
  • #3
I did coat the bearing good. I have heard that the pilot bearing would squeal like that. Would the throwout bearing stop sqealing with the slightest tap of the clutch pedal?
 
N

Na5.0HO

New Member
May 29, 2003
342
0
0
Michigan
Apr 21, 2004
#4
  • Apr 21, 2004
  • #4
I've got the same problem... think it's the throwout bearing... I was wondering if an adjustable clutch cable could stop this squeeling. Meaning, the squeeling stops under slight pressure on hte clutch, so, would tightening the clutch cable stop the sound??? Neone?
 

cmb91LX

New Member
Apr 20, 2004
432
0
0
Memphis
Apr 21, 2004
#5
  • Apr 21, 2004
  • #5
I have adjusted the cable every way possible BUT cannot get rid of the squeal or the rumble of the pedal. I am at a loss
 

ECU5.0

Banned
Jan 10, 2004
1,803
1
0
raleigh, nc
Apr 21, 2004
#6
  • Apr 21, 2004
  • #6
same problem here. just turn the music up and get louder exhaust...haha....if you find out a solution please let us know
 
You must log in or register to reply here.

Similar threads

Warm car no clutch ???
  • mac_55
  • Sep 30, 2024
  • Other Auto Tech
Replies
3
Views
243
Other Auto Tech Sep 30, 2024
Noobz347
C
SOLD 1994-2004 Maximum Motorsports clutch height adjuster
  • Cobra Jet NJ
  • Mar 3, 2024
  • Drivetrain Parts
Replies
1
Views
569
Drivetrain Parts Sep 30, 2024
Cobra Jet NJ
C
H
New kid on the block
  • HydraX
  • Mar 22, 2025
  • The Welcome Wagon
Replies
17
Views
671
The Welcome Wagon Mar 22, 2025
HydraX
H
V
Drivetrain Clutch Cable too Short?!
  • vpap1
  • May 9, 2023
  • Fox 5.0 Mustang Tech
Replies
9
Views
2K
Fox 5.0 Mustang Tech May 23, 2023
vpap1
V
Drivetrain Clutch Cable / Quad and FWA combo?
  • R82148V
  • Mar 14, 2023
  • Fox 5.0 Mustang Tech
Replies
16
Views
3K
Fox 5.0 Mustang Tech Mar 26, 2023
R82148V
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?