CNY Mustangs

[Flavadave4]

Anybody heading down to Carlisle next weekend for the all ford nationals?

there is about 12 of us metting up in Syracuse on friday morning.

 

[urban96]

bump,

anyone make it down there?

 

[urban96]

test & tune the 17th at esta?

also june 25th is the 2nd pops racing event, lots of stangs!! you guys should show up

 

[PewterLS1NY]

I would like to go if I'm around town but I might have to ride with Joe P. its seems the LS1 is done till we can pull it/fix it/replace it.

 

[urban96]

uh-oh.. what happen to it?

 

[Joe P.]

uh-oh.. what happen to it?

As far as we know now, it at least has a bad wrist pin, crank "may" be bent/cracked/out of balance also. Gonna find out once we get it torn down...
Good time for mike to get a 370" stroker I think...

 

[PewterLS1NY]

I've been chasing around a vibration when the car would get up to 70mph, started out with the axles, bearings, tires, rims, tranny mounts etc,etc....two week ago the car started running like crap and Joe took it down to DA MAN and he said that the motors done. It would explain alot about the vibes and the motor running like crap.... We'll see in coming weeks whatz up with it.

 

[Flavadave4]

POPS on the 25th......sounds like i will be there.

 

[PewterLS1NY]

It looks good that it might be a 383 for the LS1. Joe P. sent me to AD Performance and they so far have the best parts and price, actually the 2nd lowest price and even better parts. So if the crank is messed, the stroker goes in.

Also if you guys know of one that would let me borrow an engine hoist/cherry picker to remove my motor and then put it back in.

 

[urban96]

that sounds like its going to be a sick combo

 

[PewterLS1NY]

It better be....I don't think it will produce more then 475rwhp through my stock heads, I would imagne when I can afford to send my heads out it will get closer to 510rwhp. I will say about 440 rwhp I'll be statisfied and an ace load of rwtq.

 

[Flavadave4]

It better be....I don't think it will produce more then 475rwhp through my stock heads, I would imagne when I can afford to send my heads out it will get closer to 510rwhp. I will say about 440 rwhp I'll be statisfied and an ace load of rwtq.

can i getta a hell yeah for some torque......that thing is going to scream

 

[PewterLS1NY]

Hey the only thing that might steer me away from the 383 is the new fuel pump and injectors that might put the total cost out of reach for this summer.

 

[urban96]

Hey the only thing that might steer me away from the 383 is the new fuel pump and injectors that might put the total cost out of reach for this summer.

minor details

 

[PewterLS1NY]

Anyone headin to the Nationals....?

 

[Flavadave4]

Anyone headin to the Nationals....?

Might go to the show on friday if the weather is nice.....i will definatly be out Friday and saturday night cruisin around, i ususally park at the car wash on Thompson across from DD

what is up with these SyracuseStreetracers.com guys........they have ruined what used to be a fun time

Nobody races fast cars anymore......its about car lengths and hits

 

[StolenGT]

I'll be cruising Erie in the '67 Friday and Saturday until the cops shut the boulevard down.

 

[03 Pony]

Tire Shop in Syracuse

I need to replace my Toyo tires that are 275 18s in the front and 295 18s out back. Does anyone know of a good tire shop that can install these on my rims (18x9 front and 18x10.5 out back)?

I'm looking for a place that will not put the weights on the outside of my chrome rims, like what they do with the stock rims.

Thanks,
Vinnie

 

[urban96]

I need to replace my Toyo tires that are 275 18s in the front and 295 18s out back. Does anyone know of a good tire shop that can install these on my rims (18x9 front and 18x10.5 out back)?

I'm looking for a place that will not put the weights on the outside of my chrome rims, like what they do with the stock rims.

Thanks,
Vinnie

the goodyear over on circle drive in cicero, across the street from that giant drivers village dealership did my rear 17X10.5 wheels

i guess you need to reverse mount the tire or else it can tear

 

[03 Pony]

Thanks Urban Dude! That's close to a friend of mine in Clay.

I will give them a call to see what brands of tires they carry.