Cobra intake or Edelbrock RPM

[Mista Miller]

gonna be installing edelbrock 60379's, crane 2040 cam(e-303), 70mm tb equal length BBK,s. already have flowmasters, and pro-m cal'd for 19's. Have 24's not too sure if gonna install yet. And stock bottom end with 50k. Now to my question, should I go with the Cobra intake or the Eddy RPM?

Thanks
Your help is greatly appreciated....

 

[N8Miller]

24s and the RPM intake. what size MAF are you going to use? i would get a 75mm or 77-80mm if you can find one.

 

[Grn92LX]

If it has to be an E cam, i'd use an edelbrock performer. I'd pick another cam if you don't have the E cam yet.

 

[glenn95gt]

none the performer intake would be better.

 

[Allforspeed]

i vote edelbrock performer, or the tyhpoon, much more even flow between ports than the ancient gt40/cobra

 

[maverick0716]

If you're using the regular Peformer heads you might as well get the Performer intake....they're designed to work together.

 

[Highbredcloud]

i vote edelbrock performer, or the tyhpoon, much more even flow between ports than the ancient gt40/cobra

and how many intakes have you flowed to back up your statement...? FUNNY how all the test on new intakes still compare the "ancient" GT-40 style intake...

Yeah...the typhoon is a real good idea...lets get a rip off intake with rough casting and poor casting quality to get the "even flow between ports."

FYI: the Performer intake stock vs stock maybe at best flows 5-10cfm better than the GT-40/Cobra intake...

 

[mustangramair]

People say to get different intakes, but i like the GT40 style. They may not make as much top end horse power as some others, but they do make great torque.

 

[tmoss]

All this "good" advice and no one knows what trans, gears and model of stang you run!

 

[Mista Miller]

She is a 1991 LX, running a 5 speed, with 3:73's. And N*Miller I will be running a 75mm mas air.

Thanks again