Cobra IRS swap for 93 notch

I used aftermarket cobra tail pipes from the mufflers back.

MTV593 said:

Did have to chop and turn the hangers at the tail pipes?

Click to expand...

No....went right up. I removed the fox hangers by the axle.

I ordered SS tails from VRS exhaust.

I have a Flowmaster IRS catback on mine, but I had to cut and weld the passenger side flow tube to shorten it in between the H-pipe and the muffler as it was too far back and hitting the pumpkin. You can just order tailpipes if that's all you need, but you should know the IRS requires inboard-inlet:inboard-outlet mufflers and normal for a 79-04 SRA car is inboard-inlet:outboard-outlet mufflers so just adding tailpipes won't work.