I scored a set of cobra wheels for 400 bucks i did the 5 lug conversion with sn95 spindles and axles was wondering if anyone has put these on their car.
I had 94/95 Cobra wheels on my '86. They we slightly wider than 8" (don't remember if it was 8.5 or a little less). The factory tire size for those was 255/45. I think I had 255/55s on them, though. It was a while back, so I don't remember. I do remember that they rubbed the splash shield up front a little bit, but that was it. I can post a pic if you want.
Yeah post a pic please i dont know which ones they are they are the skinnier spokes of the two cobra wheels they made between 2000 and 95 i looked em up some people say they are one year and others say they are another
245/45-17 is the stock size for that and would probably be just fine for your car. I've seen people put tires as wide as 275/40 on an 8" wheel. Not sure if that's recommended or not.
See all the ones ive seen the center caps have the whole cobra mine 3 of them have the cobra facing you as if it was gonna bite you then one cap has R on it
Ok so heres a picture of the rims i did confirm that they are 17x9 with 275's on them already now the question is is 245 to small i checked tire rack and they say a 245 will fit between a 7-9 inch wide wheel but i feel thats a little stretched
True statement ill have to think about that because the 275 hit the coilover now so 245 is 3/4 smaller on each side which should give me some wiggle room