• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Code 92 question - searched it no luck - please help

  • Thread starter Thread starter Tkicker182
  • Start date Start date Aug 18, 2005
T

Tkicker182

New Member
Jul 22, 2005
9
0
0
At my house
Aug 18, 2005
#1
  • Aug 18, 2005
  • #1
Ok...I got a dyno tune and they said I was running lean so they bumped the fuel pressure up. Sure enough I got home and pulled codes and got 91 and 41 which means I'm running lean. I fixed the problem (forgot to re-attach the 02 ground) and now I get the code 92 which I guess means I'm running rich. Is this because they increased the fuel pressure to compensate for when I was lean or is it something else? thanks in advance for any replies.
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Aug 18, 2005
#2
  • Aug 18, 2005
  • #2
What's telling you it's code 91 or code 92? Those codes don't exist as far as I can tell.

These are the codes that DO exist...... http://www.gt350mustang.com/eec.htm
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 18, 2005
#3
  • Aug 18, 2005
  • #3
TJM, I dont mean to offend, but you might want to use a more complete source for codes.

TK, you had an issue, fixed it presumably, and now spit a new code. That is all there is to it.

I would clear the KAM and note what new codes, if any, occur.

Good luck.
 
T

Tkicker182

New Member
Jul 22, 2005
9
0
0
At my house
Aug 18, 2005
#4
  • Aug 18, 2005
  • #4
I cleared the codes after I ran them. Then I drove around the block and it only spit out a 92. By the way...what does KAM stand for. I assume it has to do with the computer memory.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 18, 2005
#5
  • Aug 18, 2005
  • #5
Tkicker182 said:
I cleared the codes after I ran them. Then I drove around the block and it only spit out a 92. By the way...what does KAM stand for. I assume it has to do with the computer memory.
Click to expand...
KAM = Keep Alive Memory. You are correct.

Now this makes sense. So you had a code 91 before. You fixed the issue and now you have code 92. If the code 91 was a continuous code before, it could have simply meant that the O2 was not switching at all. Now it is working, but reading high (rich). How is your milage?

Good luck.
 
T

Tkicker182

New Member
Jul 22, 2005
9
0
0
At my house
Aug 18, 2005
#6
  • Aug 18, 2005
  • #6
I don't know how my milage is becuase I have only gone through about a quarter tank of gas since I fixed the lean code. And before then I was getting around 16-19. I have an AFPR that the guys at the dyno opened up more because they said I was running lean but at the time I didn't know the O2's weren't working properly. So I was thinking I would just turn it back down and see if the rich condition goes away. I figured I would post here though before going to buy a fuel pressure gauge because I don't have one and wanted to make sure my hypothesis was logical before spending any money.
 

Euphoric306

New Member
Apr 5, 2004
905
0
0
Aug 19, 2005
#7
  • Aug 19, 2005
  • #7
sounds okay to me... you changed one thing to try and fix a problem that was cuased by something else... that somehting else was fixed and now the fuel pressure's too high causing a rich condition... the logic is all but perfect

slap a fp gauge on that baby and set her to your liking
 
T

Tkicker182

New Member
Jul 22, 2005
9
0
0
At my house
Aug 19, 2005
#8
  • Aug 19, 2005
  • #8
thanks for the vote of confidence
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 19, 2005
#9
  • Aug 19, 2005
  • #9
If the FP is within reason, the puter will adaprt the injector pulsewidth to get to stoich. It just takes a little time for the puter to adapt.

If it cant adapt, it should toss a code.

Good luck.
 
T

tjm73

Founding Member
Aug 3, 2000
2,418
2
48
Rush, NY
Aug 19, 2005
#10
  • Aug 19, 2005
  • #10
HISSIN50 said:
TJM, I dont mean to offend, but you might want to use a more complete source for codes.

TK, you had an issue, fixed it presumably, and now spit a new code. That is all there is to it.

I would clear the KAM and note what new codes, if any, occur.

Good luck.
Click to expand...

No offence taken. I searched high and low and that's the only list of codes I could find.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 19, 2005
#11
  • Aug 19, 2005
  • #11
tjm73 said:
No offence taken. I searched high and low and that's the only list of codes I could find.
Click to expand...
Here is a list which is a little more complete. The repair manual should also have a list in the emissions chapter.
 
You must log in or register to reply here.

Similar threads

I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
181
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
3K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
610
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
M
Progress Thread 1993 Ford Mustang 5.0 convertible stock manual - ODB Codes shows running lean
  • mcalvo
  • Feb 11, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
2K
Fox 5.0 Mustang Tech Feb 22, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?