Code 95 anyone?

[Threeo2]

Well my car is acting like a beeatch again. This time it cranks and gets spark but wont start and I cannot hear the fuel pump prime when I turn the ignition to the on position. I ran the KOEO codes since I dont have a test light or voltmeter to test the relay or inertia switch. So I got the code 95? Anyone ever get this code? thx in advance.

 

[jrichker]

Code 95 - the 95 code is because at one time or another the fuel pump relay hiccupped and didn't provide power the pump when the computer told it to run. Sometimes this is a one time thing, other times it is a no run or runs poorly condition.

To help troubleshoot the 95 code, follow this link for a wiring diagram http://www.autozone.com/images/cds/gif/large/0900823d80167162.gif

Using the diagram, check the red/black wire from the fuel pump relay: you should see 12 volts or so. If not, check the inertia switch: on a hatch it is on the drivers side by the taillight. Look for a black rubber plug that pops out: if you don't find it, then loosen up the plastic trim. Check for voltage on both sides of the switch. If there is voltage on both sides, then check the Pink/black wire on the fuel pump relay: it is the power feed to the fuel pump. No voltage there, check the Orange/lt blue wire, it is the power feed to the fuel pump relay & has a fuse link in it. Good voltage there & at the Pink/black wire, swap the relay.

 

[Threeo2]

Thx J, im picking up my voltmeter tomorrow and do what you suggested. I'll keep ya posted. Thx man.