I have a cold air kit on my 1993 GT that puts the round 7" or so tall high flow filter inside the fender area. I have NEVER had a problem with this set up until today. I was driving for hours in fairly heavy rain and the car started randomly bucking every so often - sometimes worse than others. Of couse I was 2 hours from home and could not stop but I did think about it..... Heavy rain, lots of mist from trucks at 65mph for extended period of time = soaked air filter that is probably dripping water droplets onto my MAF heated wires causing it to buck since it rapidly cools them and the computer cannot compensate so quickly. I stopped at a gas station 50 miles after this started and SURE ENOUGH the filter was DRIPPING WET! I have all the factory plastic shields in place with no damage to any of them and the fog lights are in place. You would think that it would not get that wet! Wrong!!! It got so wet that I only got 20 mpg during the rainy part of the drive and after having let it sit and the rain stopped I got 26mpg on the way home - BIG difference!!!! Now the question is - Does anybody make some sort of shield to put around the air filter inside the fender?