just helping yall out i recently realized a could air intake for a honda civic / acura integra will work on a mustang with a little work. i bought mine from autozone and used a cone type air filter, i had to slightly modify the air filter to make it fit my mass air and had to make some brackets out of flat steel, you also would need 1 rubber gromet for the intake, the stock grommets for air tubes to mass air sensors on 91 to 93 mustangs work just fine. i currently dont have any pics but it looks good on the car. i also added a flowmaster with an 84 gt tail pipe the pipe has a dual stainless tip which looks sweet and i removed one of my cats car is loud at about 2500 rpm