combo ??????

L

lucky GT

New Member

Dec 25, 2003

6

0

0

louisville ky

Jan 28, 2006

#1

• Jan 28, 2006

• #1

this spring me and my buddy are going to have a build off i'm going to build a351w and he is going to build a 350. the only rule is they must be n/a. he is going to buy the trick flow kit out of summit that claims it makes 500 hp with a vic jr intake and holley 750dp. my plan is to get a set of trick flow r series heads a vic jr intake a 750 dp carb and a custom cam. will the stock pistons work with them heads. about how much hp will it make? any other suggestions

 

8

86bluecobra

Advanced Member

Dec 20, 2004

4,265

12

69

B.C. Canada

Jan 28, 2006

#2

• Jan 28, 2006

• #2

why go with factory pistons? why not slip a 393 or 408 stroker into it. 500 ponies from a 350 seems a little steep with just heads and intake. after all a properly built 408 stroker in a 351w with afr 205 heads makes around the 550 to 575 mark. and thats with big block cubes in a small block package.

 

L

lucky GT

New Member

Dec 25, 2003

6

0

0

louisville ky

Jan 28, 2006

#3

• Jan 28, 2006

• #3

the tf kit comes with a cam, lifters and pushrods. after thinking about it i'm going with vic jr heads milled so i have a 58cc and boring the block 30 over the reason for not going with a stroker is im on a tight budget

 

8

86bluecobra

Advanced Member

Dec 20, 2004

4,265

12

69

B.C. Canada

Jan 28, 2006

#4

• Jan 28, 2006

• #4

why not look for a used set of afr 205's then you have lots of room to grow when you do have a budget.

 

bluevenom867

I will have images of molesting stuffed animals in

Dec 15, 2003

1,704

1

0

St.Petersburg,FL

Jan 28, 2006

#5

• Jan 28, 2006

• #5

The TFS R will eat the Vic. Jr. out of the box,they are also about $400 more though...

Also,you can use 302 pistons (yes,even stock 302 pistons) with the stock 351W rods and a "393" stroker crank (3.85" stroke) to make a 387.

 

8

86bluecobra

Advanced Member

Dec 20, 2004

4,265

12

69

B.C. Canada

Jan 28, 2006

#6

• Jan 28, 2006

• #6

never knew that blue maybe thats what i should do get some forged 30 over 302 pistons have them slapped on my 351w rods and more cubes just like that.

 

Euphoric306

New Member

Apr 5, 2004

905

0

0

Jan 28, 2006

#7

• Jan 28, 2006

• #7

don't forget the stroker crank too

 

I

IntenseBlue

Member

Jul 10, 2005

946

0

16

Jan 29, 2006

#8

• Jan 29, 2006

• #8

He mentioned a 393 stroker crank.

 

Euphoric306

New Member

Apr 5, 2004

905

0

0

Jan 30, 2006

#9

• Jan 30, 2006

• #9

i meant 86bluecobra

 

69Rcode_Mach1

Active Member

Apr 20, 2004

1,473

1

37

Salt Lake City, Utah

Jan 30, 2006

#10

• Jan 30, 2006

• #10

Yep that is the cheap stroker and it works. Also if you are on a budget, go with the Vic Jr.'s they are best bang for your buck. Now one more thing what year block are you working with, and what cam you planning on. I hope you are ready to spin that thing.