Combo?

[sl03gt]

Thumper heads and a typhoon intake with stock cam? Searched and couldn't find exactly what I was looking for. Thanks for your replies.

 

[BlownFiveLiter]

What info are you looking for exactly? Sounds like a pretty decent budget-minded combo, but I'd throw a cam in if I was already in there.

 

[sl03gt]

Just don't want to put to much intake on and kill the performance.
PF intake 1500-6500 rpm
heads idle-5500?
Just curious if anybody is running a similar combo with stock cam.

 

[BlownFiveLiter]

It's true you may lose a little low end from the PP intake and something like a GT40 based intake would be better suited to the stock cam, but usually those get a little more pricey than the Typhoon unless you're running an Explorer intake. Why no plans for a cam swap? You can usually pick up a B or E cam (I know, Ford alphabet cams are outdated) for cheap, especially a used one. You could even do it on the cheap and reuse your stock lifters if you're in a bind since it's not as critical to use new ones with a roller cam, versus a flat tappet.