I need some help picking a nitrous converter. What stall should I get? Which converter company should I go with.
Here is my combo:
Purpose: Street/Mostly Strip
Type of Transmission: C-4
Transbrake: Yes
Engine Size: 306
HP: Estimated 475
Torque: Estimated 400LBS
Compression: Around 10:1
Stroke: 3.00
Bore: 4.03
Flywheel Size: 164th
Flywheel weight: 50 ounce
Type of Heads: Windsor Sr.
Carb: Holley 750 DP with proform main body(900cfm)
Cam lift intake: .630
Cam lift exhaust: .640
Duration @ .050 intake: 250
Duration @ .050 exhaust: 260
Cam Centerline: 106
Header Size: 1 3/4
Rear-end ratio: 4.56
Tire Size: 28x10x15
Intake valve size: 2.02
Exhaust valve size: 1.60
Power Adder: Nitrous
Vehicle Weight: Around 3,000LBS
Shift Point: N/A
Trap RPM's: N/A
Suspension: Ladder Bars
E.T: N/A
MPH: N/A
60 Foot time: N/A
Current Converter: 10" Dacco Igniter S/S with advertised stall speed
3,400-3,800
THANKS, PEACE 1
Here is my combo:
Purpose: Street/Mostly Strip
Type of Transmission: C-4
Transbrake: Yes
Engine Size: 306
HP: Estimated 475
Torque: Estimated 400LBS
Compression: Around 10:1
Stroke: 3.00
Bore: 4.03
Flywheel Size: 164th
Flywheel weight: 50 ounce
Type of Heads: Windsor Sr.
Carb: Holley 750 DP with proform main body(900cfm)
Cam lift intake: .630
Cam lift exhaust: .640
Duration @ .050 intake: 250
Duration @ .050 exhaust: 260
Cam Centerline: 106
Header Size: 1 3/4
Rear-end ratio: 4.56
Tire Size: 28x10x15
Intake valve size: 2.02
Exhaust valve size: 1.60
Power Adder: Nitrous
Vehicle Weight: Around 3,000LBS
Shift Point: N/A
Trap RPM's: N/A
Suspension: Ladder Bars
E.T: N/A
MPH: N/A
60 Foot time: N/A
Current Converter: 10" Dacco Igniter S/S with advertised stall speed
3,400-3,800
THANKS, PEACE 1