• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Coolant passage on intake.

  • Thread starter Thread starter 2BADSTANGS
  • Start date Start date Jul 13, 2008

2BADSTANGS

Member
Jun 19, 2008
385
1
18
Colorado
Jul 13, 2008
#1
  • Jul 13, 2008
  • #1
This is probably a stupid quuestion but here goes. Why did the factoy run the coolant through the intake by the throttle body? I have had a cobra intake on my '93 for a while now and when I put it on, I just connected the hoses together. What are the hoses attached to? Can you just cap off where they are connected or is the best route to do as I did? Thanks!
 

Beasty306GT

Active Member
Dec 19, 2002
671
4
28
Oxford,Mass
Jul 13, 2008
#2
  • Jul 13, 2008
  • #2
I was wondering the same thing?
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Jul 13, 2008
#3
  • Jul 13, 2008
  • #3
The hoses originally connected to the EGR spacer. There have been lots of disagreement on what Fords intent was with the coolant hoses. Some say that is was to keep the TB from icing up in cold weather and others think that it was to keep the EGR spacer cooler since it has hot exhaust gases flowing through it. One of the early tricks was to bypass or plug the coolant lines going to the TB based on the assumption that it would keep the intake charge cooler. Whether that works or not I can't say. My thoughts are that the it is there to keep the EGR spacer cooler and I have never disconnected them on my cars. Exhaust gases are hotter than 180* coolant so I keep them connected. Some will agree and some will disagree. The argument has been around for a long time. If the cobra intake doesn't have spots to connect them then you could block them off at the back of the intake and the heater tube or just connect them together and route them out of he way.
 
Reactions: biminiblue92
You must log in or register to reply here.

Similar threads

X
Engine 5.0 Head Gaskets installed wrong block coolant passages???
  • Xam Sirrah
  • Jul 21, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
949
Fox 5.0 Mustang Tech Dec 22, 2025
Qtrhrse23
Engine Hiccup at full throttle
  • keel
  • Jun 2, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
1K
Fox 5.0 Mustang Tech Jul 30, 2026
keel
M
Engine Coolant Passage Gt40 Intake Swap
  • malikaimiller08
  • Nov 18, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
451
Fox 5.0 Mustang Tech Nov 20, 2024
Mustang5L5
Cooling Jacket Pitting Idea's?
  • BoostedRed89gt
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
354
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2026
Mustang5L5
M
2001 v6 heater hose quick connect question
  • mnky99
  • Sep 24, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
832
SN95 V6 Mustang Tech Sep 26, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?