cooling fan question (relay)

S&B

I hate my CT. :(
10 Year Member
Dec 18, 2005
1,634
695
204
Cheesehead
I have a delta current controler for my cooling fan, and it just doesnt cool the car down when im standing still, So i put a pusher fan on the front of the radiator. My question is can I hook it up to the delta contoler with the other fan or will it draw too much power through the unit.
I believe its a 60amp unit, i run a 95 5.0l fan assembly and a 14 inch pusher fan.
I do have a secondary relay i was going to hook up to the unit so when it came on it would trigger the secondary relay for the pusher.
thanks
 
i believe if they come on seperatly you might be ok. MIGHT. the stock 95 gt fan has a power on draw rate of 70 amps and levels out to 20 ( net search results)

just so be safe i would install either another relay or a larger one.

if you can afford to get a cheap controler for summit and wire it to the pusher fan.
 
well i could also hook the pusher fan up to a toggel switch in the car, which might be a better Idea b/c when im moving the fan does alright its in traffic when the puller fan just doesnt have enough umph.

I guess ill just do that
 
I'd keep them separate for testing purposes. I'm not real sure how a relay coil would play with the Delta Controller output anyway (though different principles, it might be a situation like trying to energize a relay from the dimmer circuit, where the relay coil could chatter if the dimmer was turned down).
 
i ended up wring the relay trigger switch into the power on the fan so when the engine hits 180 they will both come on and off together.

Ill see how that works