• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

cooling fan question (relay)

  • Thread starter Thread starter S&B
  • Start date Start date May 10, 2008

S&B

I hate my CT. :(
10 Year Member
Dec 18, 2005
1,634
695
204
Cheesehead
May 10, 2008
#1
  • May 10, 2008
  • #1
I have a delta current controler for my cooling fan, and it just doesnt cool the car down when im standing still, So i put a pusher fan on the front of the radiator. My question is can I hook it up to the delta contoler with the other fan or will it draw too much power through the unit.
I believe its a 60amp unit, i run a 95 5.0l fan assembly and a 14 inch pusher fan.
I do have a secondary relay i was going to hook up to the unit so when it came on it would trigger the secondary relay for the pusher.
thanks
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
May 10, 2008
#2
  • May 10, 2008
  • #2
i believe if they come on seperatly you might be ok. MIGHT. the stock 95 gt fan has a power on draw rate of 70 amps and levels out to 20 ( net search results)

just so be safe i would install either another relay or a larger one.

if you can afford to get a cheap controler for summit and wire it to the pusher fan.
 

S&B

I hate my CT. :(
10 Year Member
Dec 18, 2005
1,634
695
204
Cheesehead
May 10, 2008
#3
  • May 10, 2008
  • #3
well i could also hook the pusher fan up to a toggel switch in the car, which might be a better Idea b/c when im moving the fan does alright its in traffic when the puller fan just doesnt have enough umph.

I guess ill just do that
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 10, 2008
#4
  • May 10, 2008
  • #4
I'd keep them separate for testing purposes. I'm not real sure how a relay coil would play with the Delta Controller output anyway (though different principles, it might be a situation like trying to energize a relay from the dimmer circuit, where the relay coil could chatter if the dimmer was turned down).
 

S&B

I hate my CT. :(
10 Year Member
Dec 18, 2005
1,634
695
204
Cheesehead
May 10, 2008
#5
  • May 10, 2008
  • #5
i ended up wring the relay trigger switch into the power on the fan so when the engine hits 180 they will both come on and off together.

Ill see how that works
 
You must log in or register to reply here.

Similar threads

Resolved Wiring electric fan
  • cbac89
  • Aug 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
236
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
cbac89
Electrical Key on power for Fan relay
  • Nine Finger Wrenching
  • Jan 14, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
644
Fox 5.0 Mustang Tech Jan 20, 2025
Nine Finger Wrenching
Resolved Got Too Hot!!!
  • PonyGTrider
  • Apr 27, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
761
Fox 5.0 Mustang Tech May 6, 2025
PonyGTrider
Electrical Carb swaps, cooling fan options (SOLVED)
  • doctorj357
  • Jan 21, 2024
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2024
doctorj357
B
Cooling Fan Not Working
  • brian m1
  • Jun 21, 2024
  • 2005 - 2009 Specific Tech
Replies
2
Views
1K
2005 - 2009 Specific Tech Jun 26, 2024
horse sence
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?