• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Cooling System Help

  • Thread starter Thread starter warrenbh
  • Start date Start date Oct 22, 2012

warrenbh

Member
Feb 25, 2010
35
0
6
Oct 22, 2012
#1
  • Oct 22, 2012
  • #1
I'm getting a new radiator installed in my 66 gt 289. lately she has been running real hot and losing fluid; a pressure check revealed a couple small openings.

About a year ago, i took her to a performance shop and they removed her thermostat . . . Was this a good idea??

The fan shroud is torn at the bottom, should I replace? Also, should I upgrade the fan, from 4 blades to 5 or even 6?

Thanks in advance to all.
 

PoppyMod

Member
Jun 27, 2010
617
6
19
Severna Park, MD
Oct 26, 2012
#2
  • Oct 26, 2012
  • #2
warrenbh said:
I'm getting a new radiator installed in my 66 gt 289. lately she has been running real hot and losing fluid; a pressure check revealed a couple small openings.

About a year ago, i took her to a performance shop and they removed her thermostat . . . Was this a good idea??

The fan shroud is torn at the bottom, should I replace? Also, should I upgrade the fan, from 4 blades to 5 or even 6?

Thanks in advance to all.
Click to expand...


Hi,
Where are you at this point? It is never a good idea to remove the T/S permanently! (dumb idea)
Was the rad replaced with a good stock unit? Has the block been flushed? Using a 50/50 coolant mix? A 180 degree T/S is a good start. The shroud should be in good condition a 5 blade fan should be adequate. Also, is the temp gauge is reliable?
A few things to ponder.
 

rbohm

Founding Member
Apr 12, 2002
6,698
550
204
tucson,az
Oct 26, 2012
#3
  • Oct 26, 2012
  • #3
the radiator should cure most of your problems, especially since the old one was leaking. replace the thermostat with one that starts to open at around 180 degrees. and replace the shroud if it is damaged. as to the fan, again i agree that a 5 blade fan is adequate for your use, unless you live in death valley.
 
You must log in or register to reply here.

Similar threads

M
Resolved 1988 Foxbody - Overheating Summer
  • MDrisc
  • Oct 26, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
712
Fox 5.0 Mustang Tech Jul 17, 2026
fasterthangas
F
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
469
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
Help! Intake Manifold Gasket or Head Gasket?
  • foxbodyclark
  • Oct 4, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
95 Laser GT Ver
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
952
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?