since you did not tell us what tranny or what year the car is I looked up a 2001 T-45 and came up with 20 ft/lbs for the two lower bellhousing to engine bolts and 55 ft/lbs for the rest of the bellhousing to engine bolts.
The trans case to bellhousing bolts is 20 ft/lbs and should be tourqed in a star pattern.
on the TR-3650 trans the only difference is the bellhousing to trans case tourqe is 23 ft/lbs
The bellhousing to tranny bolts will be torqued with the tranny out of the car. I will probably end up having to do the bellhousing to motor top bolts by feel and the bottom ones with the torque wrench.