Cowl Hood

[skpm316]

Does anyone know where I can get a 4" or 4 1/2" cowl hood ( NOT cobra R ) for 94-95. Keanan makes a 3", but the specs on their hood will not clear my set-up. Your help and input is greatly appreciated. Thanks

 

[Blackened302]

tried ABC Exclusive, but all they have is the cobra R cowl. Cervini's, perhaps? I know they make a nice 4"/5" cowl for the foxes, so might wanna see if they've got one for the sn95.

 

[stprorolla49]

tried ABC Exclusive, but all they have is the cobra R cowl. Cervini's, perhaps? I know they make a nice 4"/5" cowl for the foxes, so might wanna see if they've got one for the sn95.

yea cervinis makes a 3.5" regular cowl hood for SN95's.....theres another company that makes a 4" but its in a mag ad and im at work now...ill find out later and let you kno

 

[skpm316]

Cervini

I had a Cervini hood on the car. I sold it. It would not clear my new set-up, because it had an smooth under lining.It was only 2 1/2 " over stock, it is the only cowl hood Cervini sells for 94-98. It was a nice hood. Thanks for all the input. Let me know about the other company in the magazine.

 

[CManT1914]

I don't know about the hood, but on a side note, what the heck do you have in there that you need a 4.5" cowl? Must be one badass motor.

 

[stprorolla49]

I had a Cervini hood on the car. I sold it. It would not clear my new set-up, because it had an smooth under lining.It was only 2 1/2 " over stock, it is the only cowl hood Cervini sells for 94-98. It was a nice hood. Thanks for all the input. Let me know about the other company in the magazine.

liberty mustang supply (www.libertymustangsupply.com) has a 3.5" regular cowl hood for 94-98 (sry i thought it was 4") and they also have a 4" cobra RR hood which is pretty nice....the hoods are cheap too btw wtf is under the hood that needs all that room???

 

[skpm316]

whats under hood

Well right now I have a A4 block, stroked to 347 w/TFS R-series box intake & T-trim ( it is 13 1/2" from block to top of intake ). I have a 427 ( Man O War block ) being built by Bill Mitchell, it should be here in a month or so. I am either going to run a YSi or Big Ass turbo.If anyone wants me to send pics of the 347 please PM me your email.

 

[MysteryMachine]

have you checked Harwood I think their called not sue what they have but i know they make hoods for our cars cause the shop showed me a mag when my car was in getting the front fixed when the POS hood that was on it blew up

 

[skpm316]

have you checked Harwood I think their called not sue what they have but i know they make hoods for our cars cause the shop showed me a mag when my car was in getting the front fixed when the POS hood that was on it blew up

They only have a Cobra R style hood. I am looking for a cowl hood. Thanks for replying.

 

[TrueBlue95GT]

I'm not saying that you're going to like this hood, but scroll down to their carbon fiber cowl hood.
http://www.mrbodykit.com/bodykits/hoods94_98.htm

 

[skpm316]

Carbon fiber

The carbon fiber hoods look great but unfortunatley they will not clear my set-up and they do not have a cowl hyood. thanks for replying.

 

[SeventyMach1]

Maybe you went too far & skipped over the one he was referring to..... it is the EXACT carbon fiber hood that I had on my old '95 GT. I painted it yellow to match my car. I loved it. I like those better than the Cobra R that I now have (on my '94 GT). I'm sure it will clear your setup, but I don't know. I know it was taller than my current Cobra R....

 

[SeventyMach1]

They also have this 4" Cobra RR fiberglass hood .....

 

[Crawlin306]

Harwood should have a 4 " Cowl for SN95's ..

 

[stprorolla49]

what the hell kinda intake you got under there that you cant run any of these hoods?!?!?!?!

 

[DARK-5.0]

I can't believe that you're needing this much clearance with that box r intake, but here you go, this should do it...haha

http://shop.eharwood.com/cgi-bin/harwood/1128.html

Jeremy

 

[skpm316]

Harwood

I am probably going to have to get the harwood 4" cobra r hood because no one makes a regular 4" cowl. My intake set-up is 13 1/2 " tall and when I put the 427 in next year I am going to gain around another 1 1/2" . When I put the 427 in I am going to put in different motor mounts so the engine will sit lower about 1" to 1 1/2", then i will be back at around 13 1/2" Thanks for all the replys any other replys will be greatly appreciated.

 

[95WhiteVenom]

Yea If thats you with the yellow car with the TFS box i remember what it looks like. Yes they are a very tall set-up. Most hood won't come close. Harwood Cervinis and mr. body kits won't have anything like you need. Sounds like really you need a custom made 4.5" Cowl hood. Would prolly cost a pretty penny. I would love to see one. I think the single cowl regular cowl hood would look great on our cars. Just no one makes them that are big enough.

 

[skpm316]

blac cobra

I have a black 95 Cobra. Do you have pics of the yellow 95 you are talking about.

 

[stprorolla49]

Yea If thats you with the yellow car with the TFS box i remember what it looks like. Yes they are a very tall set-up. Most hood won't come close. Harwood Cervinis and mr. body kits won't have anything like you need. Sounds like really you need a custom made 4.5" Cowl hood. Would prolly cost a pretty penny. I would love to see one. I think the single cowl regular cowl hood would look great on our cars. Just no one makes them that are big enough.

you're thinking of the guy (jesse i think) that used to have that yellow cobra, and now he's got a sonic blue 03-04 cobra....