Cracked Tubing Upper Intake

Artemisia22 · Dec 2, 2023

anybody know where to find this tubing? Both ends are cracked. Tubes are found underneath the upper intake

evintho · Dec 2, 2023

The actual PCV hose from the 'T' to the PCV valve can be found here.....

https://lmr.com/item/LRS-6664A/1986-95-Mustang-50L-Pcv-Valve-To-Upper-Intake-Hose

The second half of the hose, from the 'T' to the fitting on the bottom of the manifold, may be harder to find. This looks like it may work, though.........

https://www.autozone.com/emission-control-and-exhaust/pcv-valve-hose/p/dorman-pcv-valve-hose-46033/319386_0_0?spps.s=3333&cmpid=LIA:US:EN:AD:NL:1000000:HRD:19489353553&&CATARGETID=120054150001290089&CADevice=c&gad_source=1&gclid=EAIaIQobChMI4qT3zsjxggMVnF1_AB2D1gBSEAQYBiABEgLr5PD_BwE&gclsrc=aw.ds

Kid wita 5oh · Dec 2, 2023

Or just go to your local parts store and buy hose for WAY less ...

Rdub6 · Dec 2, 2023

I’d be concerned with the bend going into bottom of the manifold. Just a regular length of hose will definitely kink after a while at that point.

nickyb · Dec 2, 2023

You could put a short hose with a 90 elbow then the straight hose so you won't have Kinks.

Kid wita 5oh · Dec 3, 2023

Rdub6 said:
I’d be concerned with the bend going into bottom of the manifold. Just a regular length of hose will definitely kink after a while at that point.

Just need a longer sweep of the hose(still contained under the plenum.) and it won't kink

General karthief · Dec 3, 2023

Cozy up to a parts counter person at your local auto parts and find a hose with one end at 90* and enough length to reach the nipple at the plenum.

90sickfox · Dec 5, 2023

You just need one of these on a new regular hose. Keeps it from kicking.

5.0Link · Dec 9, 2023

11/32 vacuum line. Parts store had it over night. 5’ did pcv, main tree and all under neath upper intake. Just cut all that hard cracked crap off

Mustang5L5 · Dec 11, 2023

Is that emissions/fuel line, or standard vac hose?

The latter won't stand up to the oil that will be drawn through the system.

Artemisia22 · Dec 28, 2023

Thanks to everyone who replied, I ended up using fuel line for the pcv valve connection and I’m just gonna end up running the other hose

I’m swapping the 5.0 over to a 5.8 EFI, just wanted to get this baby to pass smog before doing so

Cracked Tubing Upper Intake

Artemisia22

Member

evintho

Kid wita 5oh

I'm definitely not in the original hole

Rdub6

So while I wait to figure out my rear end issues

nickyb

I gotta say i never painted my nuts, Never Ever

Kid wita 5oh

I'm definitely not in the original hole

General karthief

wonder how much it would cost to ship you a pair

90sickfox

Wasn't a pretty sight...and I've got big hands

5.0Link

Member

Mustang5L5

That is…until I whipped out my Bissell

Artemisia22

Member

Similar threads

Cracked Tubing Upper Intake

Member

I'm definitely not in the original hole

So while I wait to figure out my rear end issues

I gotta say i never painted my nuts, Never Ever

I'm definitely not in the original hole

wonder how much it would cost to ship you a pair

Wasn't a pretty sight...and I've got big hands

Member

That is…until I whipped out my Bissell

Member

Similar threads

Privacy & Transparency

Privacy & Transparency