Cracked Tubing Upper Intake
- Thread starter Artemisia22
- Start date
-
- Tags
- cracked oem tubing upper intake
evintho
20+ Year Stangneter 
The actual PCV hose from the 'T' to the PCV valve can be found here.....
The second half of the hose, from the 'T' to the fitting on the bottom of the manifold, may be harder to find. This looks like it may work, though.........
The second half of the hose, from the 'T' to the fitting on the bottom of the manifold, may be harder to find. This looks like it may work, though.........
I’d be concerned with the bend going into bottom of the manifold. Just a regular length of hose will definitely kink after a while at that point.
You could put a short hose with a 90 elbow then the straight hose so you won't have Kinks.
Just need a longer sweep of the hose(still contained under the plenum.) and it won't kink
Cozy up to a parts counter person at your local auto parts and find a hose with one end at 90* and enough length to reach the nipple at the plenum.
- Mar 2, 2015
- 6,945
- 5,816
- 213
You just need one of these on a new regular hose. Keeps it from kicking.
11/32 vacuum line. Parts store had it over night. 5’ did pcv, main tree and all under neath upper intake. Just cut all that hard cracked crap off
Last edited:
Is that emissions/fuel line, or standard vac hose?
The latter won't stand up to the oil that will be drawn through the system.
The latter won't stand up to the oil that will be drawn through the system.
Similar threads
