• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

crossmember -AUTO SAME AS MANUAL?

  • Thread starter Thread starter blckstng96
  • Start date Start date Apr 15, 2008

blckstng96

Member
Apr 13, 2004
208
0
16
Apr 15, 2008
#1
  • Apr 15, 2008
  • #1
im in the process of switching my auto car to 5spd and im just wondering if i can use the uto crossmember or if i have to change it.also is the 4cyl t5 have the same crossmember as either?
 
D

Deleted member 87397

Apr 15, 2008
#2
  • Apr 15, 2008
  • #2
The crossmembers are not quite the same, but I've heard numerous people say the auto one will work for the manual conversion. The crossmember for the 4 cylinder T-5 and the 8's I would think would be the same for ease of tooling and stuff, but I'm not 100% sure. Just make sure it's a double hump so it will clear the dual exhaust and you should be good.
 

blckstng96

Member
Apr 13, 2004
208
0
16
Apr 15, 2008
#3
  • Apr 15, 2008
  • #3
sounds good.thanks
 

wythors

Get off my lawn!!!
Founding Member
May 17, 2000
2,277
35
69
C Addle
Apr 15, 2008
#4
  • Apr 15, 2008
  • #4
The crossmembers are the same, just welded in a different spot. To use your AOD crossmember, grind off the spot welds where the bushing tubes are attached to the crossmember, adjust it accordingly and reweld.
 

fiveohlxhatch

New Member
Sep 18, 2007
27
0
0
Apr 15, 2008
#5
  • Apr 15, 2008
  • #5
wythors said:
The crossmembers are the same, just welded in a different spot. To use your AOD crossmember, grind off the spot welds where the bushing tubes are attached to the crossmember, adjust it accordingly and reweld.
Click to expand...

I helped a friend do the same as described above. The 4cyl crossmember will only have "one hump" for the single exhaust to clear. You need a "double hump" V8 crossmember so just do as described above and reuse your original.
 

wythors

Get off my lawn!!!
Founding Member
May 17, 2000
2,277
35
69
C Addle
Apr 15, 2008
#6
  • Apr 15, 2008
  • #6
Oops! I missed the 4 cylinder part. Yep, you need a V8 one, but any V8 one will work.
 
You must log in or register to reply here.

Similar threads

B
manual swap
  • brockb
  • Feb 9, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
317
SN95 4.6L Mustang Tech Feb 24, 2026
squeak93
C
Help with manual conversion
  • CPH89LX
  • Aug 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
706
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
2000xp8
C
New member from NJ
  • Calyp5.0
  • Sep 25, 2026
  • The Welcome Wagon
Replies
1
Views
132
The Welcome Wagon Sep 25, 2026
General karthief
A
SN95 Multifunction Madness! Need some big brain assistance from you folks
  • Awnaw
  • Oct 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
135
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 10, 2026
AeroCoupe
F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech Sep 7, 2026
Kleinjj27
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?