crossmember help needed asap.

skunk21

Active Member
May 22, 2007
1,203
3
36
Taxachusetts
My stang is at the tranny shop gettin finished up. when I took the lower boot out to show the guy how the tranny was touching the body like the tranny was mounted high up, pretty much the shifter part if the tranny comes threw the floor and the body part of the tranny is touching the tranny tunnel, he said he would look into it for me.

he called me today and he thinks the previous owner installed for some reason an automatic tranny crossmember? I had a new clutch and rear main done and they reinstalled it and they can't get it to sit right at all and that's all they can think if of.

are there 2 different cross members? and would a auto one cause the t5 to mount up high in the rear? they changed the mount also. the ford dealer wants $160 holy crap and no yards have one. 50 resto has the ford racing double hump I thinks it called for #60 would this work out for me or what could I do, need to come with something. they are trying to work with me if I can find one cheaper or a way to fix it. thanks.
 
There are do different crossmembers but on is a 4cyl and then the double hump like the v8 cars have. Sounds like you car was a auto car at one time and someone did a swap and didn't cut the floor out so the shifter would fit.
 
AHH, makes sence. I ordered a manual tranny crossmember but looks like might have to cut the floor also. they may have done a swap but used the auto crossmember. ford does list 2 different part #'s for the cross members auto and manual. funny ford still stocks the manual one the auto one is obsolete.
 
The crossmembers are the same. Only difference is where the tack welds are to the sleeve that the bolt passes through. With the AOD crossmember, you just grind the welds off and adjust. The Ford racing crossmember is just the same thing not welded.

So cancel your order if you can because you just bought the same Xmember you already have.


I would look at the motor and tranny mounts.

Also, check your door tag under trans. What's the code? This will help determine if your car was originally an AOD
 
I wish I could but just my luck the only freaken panel on this whole car that was changed was the drivers door and fender from a minor accident about 10yrs ago. do you think they saved the sticker, no. I'll never know any of the other build info on my car now. this is just another fun trip with this stang :bang: . I'll return the xmember, I'll take a ride to the shop in the am looks like It's more about cutting the freaken floor to get the tranny to fit right :mad: . I'm not giving up on her but it's like walking into crap blind and it's wearing on me right now :shrug: . I have had wiring fun, hacked stuff under the hood etc. that is finally fixed now this, I'm afraid to move on to the next step.

oh well thanks for the help guys.
 
Chekc the motor mounts first.

If you have the stock fan, see if the blade is cracked on the tips from hitting the bottom of the fan shroud.

Take pics if you can. I can't really say what shouldn't be there without seeing it
 
I haven't noticed anything like that but didn't really check either. what is the deal with the mount? are they different for the tranny types? and that causes the mounting problems.


edit myself..figured out your trying to tell me I have worn out mounts(slaps self on forehead)
 
If it truely was an auto, then part of the conversion process is to snip that area away with tin snips.


Time to start looking for clues that the car was an automatic. Pull the computer out and read us the part numbers off is. Not foolproof since it could have been changed, but if there is an AOD computer in a 5-spd car, then we have some evidence. If it's a 5-spd comp, we'll check something else