• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Crower 15511 in SD Mustang

  • Thread starter Thread starter GreyMare88
  • Start date Start date Oct 19, 2019
G

GreyMare88

Member
Jan 30, 2019
69
2
18
Statesboro, GA
Oct 19, 2019
#1
  • Oct 19, 2019
  • #1
Just wanted everyone's opinion on the 15511; I already have this cam but still having to decide between this one and the Comp Cams hr264; I like the specs on both and I'm still indecisive..also I'm running EGR delete with GT40P heads and wanted to make sure it doesn't have any drivability issues. I don't plan on going back in to her after that but I'm thinking of eventually supercharging with a MSPNP. Any comments or criticism will be appreciated.
 

revhead347

Apparently my ex-husband made that mistake.
20+ Year Stangneter
Jun 14, 2004
9,303
1,648
214
Acworth, GA
Oct 20, 2019
#2
  • Oct 20, 2019
  • #2
Call Comp Cams directly. You will get much better advice from them than you will here. They have more than enough off the shelf grinds to fit your needs. There are lots of members on this website, but the odds of someone being able to give you specific advice on what they consider driveable is pretty slim.

Kurt
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,500
8,753
234
S.I.NY
Oct 20, 2019
#3
  • Oct 20, 2019
  • #3
GreyMare88 said:
Just wanted everyone's opinion on the 15511; I already have this cam but still having to decide between this one and the Comp Cams hr264; I like the specs on both and I'm still indecisive..also I'm running EGR delete with GT40P heads and wanted to make sure it doesn't have any drivability issues. I don't plan on going back in to her after that but I'm thinking of eventually supercharging with a MSPNP. Any comments or criticism will be appreciated.
Click to expand...
If the plan is to do a stand-alone such as a mspnp then I wouldn’t worry about the cam being SD safe . I’d just do the cam at the same time you make the ecu change. Any competent tuner will get it to drive really well
 
Reactions: GreyMare88

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"
15 Year Member
Nov 29, 1999
14,679
424
154
Boca Raton, Florida
Oct 21, 2019
#4
  • Oct 21, 2019
  • #4
Had the 15511 in my 94GT for 15 years. Split duration, high lobe (115) is a must for 94-95 cars for idle and drivability. I did take advantage of this cam by running 1.7 FRPP rockers to increase the lift.

In N/A stock block, GT40 Aluminum heads, Edelbrock RPM intake, 70MM TB, 80MM MAF, 24 Pound Injectors, 1-5/8" Long Tubes, 2.5 Exhaust system back, etc. The car mad 292 HP at the wheels.

I then slapped a Vortech S-Trim, 42 pound injectors, etc. and it made over 480HP.

The 15511 was a great cam.
 
You must log in or register to reply here.

Similar threads

S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
S
Requesting Guidance for 306 motor swap - Fuel? - SD? MAF?
  • So_Flo
  • Jul 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 4, 2026
Mcmahst
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
J
68 Mustang with Foxbody Engine Stalling Issues - MSPNP2
  • JayV68Stang
  • Mar 13, 2025
  • Digital Self-tuning Forum
Replies
3
Views
493
Digital Self-tuning Forum Mar 13, 2025
JayV68Stang
J
2
Bought an engine for my project
  • 2stroke1971
  • Jul 7, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2024
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?