• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Cylinder Head Compression

  • Thread starter Thread starter foxmustangman
  • Start date Start date Feb 23, 2008

foxmustangman

Member
Jun 20, 2007
196
1
16
Idaho
Feb 23, 2008
#1
  • Feb 23, 2008
  • #1
So I'm new to how to calculate the entire compression thing. So answer me this. From a stock head (64cc) [correct me if I'm wrong] changed to a head with 58cc, what will the new compression ratio be?

-FMM
 

mazroth

Member
May 20, 2005
56
0
6
KY
Feb 23, 2008
#2
  • Feb 23, 2008
  • #2
I dont know all the figures into figuring compression, but with a stock non 86 motor, with a .39 head gasket, should be about 9.5 to 1.
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Feb 23, 2008
#3
  • Feb 23, 2008
  • #3
64cc head * 302 cid *

Bore Size: 4.000
Gasket Bore: 4.100
Piston Top Land Dia: 3.965
Stroke: 3.000
Connecting Rod Length 5.090
Compression Height: 1.600
Deck Height: 8.200
Ring to Top of Piston 0.250
Gasket Thickness: 0.040
Valve Notches Volume: 4.00
Dome Volume: 0.00
Volume Head: 64.00
-------------------------------------
:COMPRESSION RATIO: 8.760
-------------------------------------



calculation variables:

Piston to Deck: 0.010
Crank Throw: 1.500
Vol. Above Top Ring: 0.90 cc
Piston to Dec Vol.: 2.06 cc
Gasket Volume: 8.65 cc
Volume Clearance: 79.61 cc
Cylinder Volume: 617.78 cc
CID: 301.474

58cc head* 302 cid *

Bore Size: 4.000
Gasket Bore: 4.100
Piston Top Land Dia: 3.965
Stroke: 3.000
Connecting Rod Length 5.090
Compression Height: 1.600
Deck Height: 8.200
Ring to Top of Piston 0.250
Gasket Thickness: 0.040
Valve Notches Volume: 4.00
Dome Volume: 0.00
Volume Head: 58.00
-------------------------------------
:COMPRESSION RATIO: 9.393
-------------------------------------



calculation variables:

Piston to Deck: 0.010
Crank Throw: 1.500
Vol. Above Top Ring: 0.90 cc
Piston to Dec Vol.: 2.06 cc
Gasket Volume: 8.65 cc
Volume Clearance: 73.61 cc
Cylinder Volume: 617.78 cc
CID: 301.474
 

foxmustangman

Member
Jun 20, 2007
196
1
16
Idaho
Feb 23, 2008
#4
  • Feb 23, 2008
  • #4
Excellent. Thank you.
 
You must log in or register to reply here.

Similar threads

Engine Are These rings OK?
  • PonyGTrider
  • Sep 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
343
Fox 5.0 Mustang Tech Sep 26, 2026
PonyGTrider
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
614
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
295
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
718
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
C
Engine Cylinder 5,,7, & 8 run significantly cooler than the other cylinders
  • Crisfixes
  • Sep 27, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
315
Fox 5.0 Mustang Tech Sep 27, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?