D&D K member

[Blackgtmustang]

Im about to order the D&D tubular k member and tubular a arm and coil overs... yesterday i bought lake wood 90 10s and 50 50s for the rear... how much do you think all this will improve my 1/8 mile time... i ran a 8.81 @ 80 mph on a 1.96 60 ft that was also before i stage 3 ported my stock heads and added a set of long tube headers on it... does anyone have a clue how much all this will help me ??

 

[Blackgtmustang]

trying to get high 12s on stock heads on street tires... im pretty sure i can do it.. im thinking somewhere around a 8.3 in the 1/8 mile... them im going to throw a set of stage 3 victor jr 2.02 1.6 heads on it and try to run some mid 12s before i spray it

 

[VibrantRedGT]

Should be real nice. I'm going to order the K member and Strange struts. You will knock some weight off plus get more power to the ground.

 

[Nik_95Cobra]

Can you run these K-Members with the stock Strut setup? Or, must you run coilovers...Thanks.

 

[94TURBO5 O]

Let us know how it goes. I would like to do the same in the near future. Get some pics up when she's done.

 

[VibrantRedGT]

Can you run these K-Members with the stock Strut setup? Or, must you run coilovers...Thanks.

You can get it in the stock set up as well as coil overs.

 

[windsor396]

trying to get high 12s on stock heads on street tires... im pretty sure i can do it.. im thinking somewhere around a 8.3 in the 1/8 mile... them im going to throw a set of stage 3 victor jr 2.02 1.6 heads on it and try to run some mid 12s before i spray it

Victor jrs to my knowledge only come in 2.05 intake valves, you may want to check on the edelbrock website though just to make sure. A tfs twisted wedge would be better if you are going to keep the stock pistons in it......

Just my .02

 

[Blackgtmustang]

i dont have a stock bottom end... its a 306 race balanced speed pro pistons and main stud girdle.. and im pretty sure they come in 2.02 1.6 but i could be wrong... i will make sure and get some pics

 

[Nik_95Cobra]

Who makes one that can be used in conjunction with the stock Struts? I looked the other night but all the ones I found required the use of coilovers.