D.S.S Pro Bullet 306.... Opinions and induction recommendations

[Rick 91GT]

The weak link in the bottom end is the rod bolts, then I would say pistons, and always the block over 450hp or so...

IF you want a blower you really do want a good forged crank so you do not snap the snout off....

 

[millhouse]

The weak link in the bottom end is the rod bolts, then I would say pistons, and always the block over 450hp or so...

IF you want a blower you really do want a good forged crank so you do not snap the snout off....

Even so…the stock crank, rods, rod bolts & pistons all are capable of supporting more h/p than the block can handle. Another thing to keep in mind is that…if your going to be pushing the limits of the stock block there is no guarantee that anything is going to survive. Yes, a main girdle certainly will help everything stay together during a catastrophic failure…but again, there is no guarantee that it's going to prevent damage to the crank or the rest of the rotating assembly.

 

[smallstang393]

A main girdle just makes sure when it does go it piles up nice and pretty in the block,it doesn't save the parts just keeps them together