Dash bezel inserts - who needs some?

I'm trying to get a feel for who is ready NOW to buy brushed aluminum or stainless steel dash bezel inserts sets. A set will consist of a driver's side, passenger side, coin tray inserts. (Any combination of clock, AC, & wiper). Other materials / finishes / custom gauges holes, etc may come later, but the primary need right now seems to be for stock parts.

I need to provide a quantity estimate for an initial order to get these quoted. I'm going to have both 0.020 stainless and aluminum quoted (if they can get it), but will only order one or the other, not both. According to the survey (~118 respondents), aluminum is preferred over stainless by about 2 to 1

So... if you are SERIOUSLY ready to buy and would like a set off of this first order if the price is competitive, chime in here with how many sets you would need AND what material (aluminum or stainless) would be your preference.

I'm posting this on MustangII.net, Stangnet, All Ford Mustangs and on the Yahoo Mustang II group, if you are member of these other communities, please only reply once. (i.e. don't reply that you want 3 sets on both MustangII.net and Stangnet, otherwise I'll think I need to plan for 6 when really I need to plan for only 3).

You can see some pictures and other information regarding dash inserts in this thread on MustangII.net: Mustang II Network Forums - Mustang II dash bezel insert survey

Again, this is NOT a commitment to buy anything, I just need a number for quoting purposes for this first order.

Thanks,

Shawn (feeble)

Just an update for those that are interested. I haven't heard anything from the manufacturer on my quote request so I called my friend last night who runs their laser. He said the laser was down and would be repaired Monday. More unfortunately, his boss hasn't had time to work on a quote or research materials. I'll give this another week or two and if I haven't seen any forward progress, I'll start looking for another manufacturer. I did find a company with a water jet that is actually a little bit closer to me (but still an hour and a half away)

Thanks for your continued patience everyone.

Regarding the 2011 Roundup, there are several threads over on MustangII.net. I've linked them on the bottom of this page: http://www.mustangiiroundup.org/

Regarding the dash inserts, the company that cut the samples is apparently getting too busy to work on this project so I have been in contact with another manufacturer and will be getting him some drawings tomorrow to be quoted.

If you really need them now, I understand that Mustang II Specialty Shop may have some but they are kinda spendy.

Just a quick note to let everyone know I am still working on this. I would not have thought this to be so tough to do.