DCC fan controller, is this the right one?

[281pony]

i scored a dcc controller new without waiting. i have a mark 8 fan to use with it. i am just looking to verify this kit i purchased works.

i have read to get the "fk35" kit, there is nothing listed as fk35 on his site. i purchased the kit that is $80, it says it will control all ford 2 speed fans.

i want to make 100% sure, i dont want to install this and burn it up. cause i wont wait 8 weeks for another more expensive one. it took me a year to find one under the circumstances i did lol.

quoted description of my controller;

"Our 2sp controller will control all of the two speed Ford cooling fans, including the 3.8L Taurus fan correctly, the low speed circuit is calibrated to turn the fan on low at 185F, but is adjustable over a wide range of temperatures. The high speed circuit turns the fan on high at 10 degrees higher in temperature while disabling the low speed circuit"

 

[HISSIN50]

You could email Brian to confirm.

Look at the last paragraph here

Sounds like you should be ok.

 

[281pony]

i missed that, thanks jt.

i did email him, but i have heard responses are rare. its been 3 days now without one, lol.

 

[vristang]

Did the kit come with some instructions?
I may have something left from what I have if you need some documentation...

jason

 

[281pony]

thanks for the offer, it did come with instructions. nothing outside the statement off his website though.

jt gave me the info i needed. it will work, and he wrote me back today. he said if its a 2 speed fan it will work. last i checked, mark 8 fans are 2 speed so im usin it.