• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Decision is made, any advice is appreciated!!!

  • Thread starter Thread starter StangLou
  • Start date Start date Apr 22, 2004

StangLou

Active Member
Jul 9, 2003
1,264
0
36
Holly Springs, NC
Apr 22, 2004
#1
  • Apr 22, 2004
  • #1
Ok guys, I have made my first decision on my project car .
The car is a '90 LX 5.0 Hatch Auto thats basically stock except for a CAI, pulley's and Flowmasters.
After talking to my shop and letting them know what I want out of the car, here is a general idea of whats going down.
The goal is a 100% streetable 450-500hp car.
Step 1. Auto is coming out and a TKO 5 speed is going in, new pedal assembly, Spec Stage II or a Stage III clutch, Flywheel TBD, and a Steeda Adjustable Clutch quad with cable. Also L/T's, and a mid pipe will go on at this time.
Step 2. Build up the rear end. FRPP 3.73's, 28 Spline axles, and a locking diff.
Step 3. Start building a race prep 5.0 block. Havent gotten specifics yet, but it will be stroked to a 331 . Systemax Stage II head, Systemax or a Cobra Intake if I can find one, and a cam with a s/c grind.
Step 4. Vortech s/c
The idea is for it to be street legal so I can enjoy it, and it be able to go on trips to the track, beach, show, whatever I want to.

My question to you guys is this... I know this is a very general list, but does it sound like a good start so far. This is a ton of $$$ going into this, but the car was my first Stang. It was good to me for 6 years, I garaged it after I bought my '03, and now I want to get it to where I have always wanted it
What exhaust set up would you guys recommend? I was thinking of MAC or BBK L/T's, BBK catted Mid, and keep my Flows. I went to Mustangexhaust.com but they didnt have as many combos as I hoped they would. If any of you guys have clips I would love to hear them. I want a very deep throaty rumble at idle, and for it to roar when I hit it.
Thanks guys, let me know what you think, I know the 4.6 guys are very vocal lol I hope you guys will be as well
 

StangLou

Active Member
Jul 9, 2003
1,264
0
36
Holly Springs, NC
Apr 24, 2004
#2
  • Apr 24, 2004
  • #2
no one

ttt
 

5.0 HOtrain

Founding Member
May 20, 2001
2,247
0
47
New Hampshire
Apr 24, 2004
#3
  • Apr 24, 2004
  • #3
Have you ever though of doing a n/a stroked 351? Can make the hp you're looking for w/out the s/c tuning. Just a thought, I have nothing against blower setups, just didnt want the hassles. My #'s in sig, out of box parts, roller cam, pump gas.

Now to adress you're first questions, are you looking for that hp at the wheels or flywheel? If rwhp go with an aftermarket block such as an "R" block or dart block (dart is nicer). I would go with the 1 3/4 bbk long tubes, do you need cats? Also would go 3 inch the whole way, mac makes a decent 3 inch cat back. Good luck.
mike.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Apr 24, 2004
#4
  • Apr 24, 2004
  • #4
Sounds to me like you're thinking reasonably about it. If you really want that amount of HP and streetability, boost is a great way to get there. Keep the chassis/structural, suspension and especially BRAKES in mind -- with that much juice, you're gonna want the rest of the car to stand up to it.
 
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
S
347 with Vortech V2 and Holley quick fuel, AFR Renegades a tremec tko 600 advice for newbie pls
  • Schargedfox
  • Monday at 2:02 AM
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
208
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 28 minutes ago
2000xp8
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
908
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
J
Wheels-Tires Need Some Help - Brakes Upgrade/Wheel fitment
  • jaygee15
  • Dec 8, 2025
  • Fox 5.0 Mustang Tech
  • 3 4 5
Replies
81
Views
2K
Fox 5.0 Mustang Tech May 6, 2026
AeroCoupe
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
174
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 8:05 PM
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?