• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

delayed throttle response

  • Thread starter Thread starter tealstang67
  • Start date Start date Aug 2, 2009

tealstang67

Member
May 19, 2009
47
0
6
Aug 2, 2009
#1
  • Aug 2, 2009
  • #1
I have some issues that i do not know where to start looking for answers. First off i just finished my a2a intercooler project and now with the same tune that ran fine with out the ic it dies at lights and also has a delayed throttle response very noticable. Any suggestions or help would be great.
 
3

302GTS

If you need herpes, I'm your man!
Apr 20, 2009
481
2
18
Largo, FL
Aug 3, 2009
#2
  • Aug 3, 2009
  • #2
Is your EGR system working properly? I had very similar issues when my EGR was being bypassed via disconnected lines and a plugged line. I plugged in the EGR, reset the computer, and the car ran like a dream afterwards. No more stalling, no more throttle delay.
 

tealstang67

Member
May 19, 2009
47
0
6
Aug 3, 2009
#3
  • Aug 3, 2009
  • #3
Thanks but i don't run an egr though. Actually my bypass is routed in to where the egr used to be. .
 
3

302GTS

If you need herpes, I'm your man!
Apr 20, 2009
481
2
18
Largo, FL
Aug 3, 2009
#4
  • Aug 3, 2009
  • #4
tealstang67 said:
Thanks but i don't run an egr though. Actually my bypass is routed in to where the egr used to be. .
Click to expand...
That may very well be the issue - the bypassed EGR. Do you have the EGR being bypassed via the EEC? Otherwise it'll keep thinking the EGR's just malfunctioning if I'm not mistaken. I chased my stalling issue for months, and plugging the EGR in solved the issue.
 

tealstang67

Member
May 19, 2009
47
0
6
Aug 3, 2009
#5
  • Aug 3, 2009
  • #5
the egr is turned off in the tune. I am starting wonder if my manifold settings,injector offset, or maybe even the maf curve is off now that there is an intercooler in the mix. Going from 200 degree act to 100 degree act could be the problem. I am just not sure where to start. I have got hours invested in this tune and looks like i get to start over once again.


but that is why i bought the tuning stuff so atleast i will learn what to do.
 
3

302GTS

If you need herpes, I'm your man!
Apr 20, 2009
481
2
18
Largo, FL
Aug 4, 2009
#6
  • Aug 4, 2009
  • #6
Damn, unfortunately I don't know anything about tuning with something like a Moates, Anderson, or TWEECER. Hopefully someone can come in here with more information that can help you.
 

pirotec354

Member
Aug 28, 2008
127
0
16
Grand Rapids, Michigan
Aug 4, 2009
#7
  • Aug 4, 2009
  • #7
Can you tell if you are running leaner with the a2a installed? do you have a wideband? Remember, cooler air means denser air. I would get a good long datalog and see if you can see anything. I got a moates quarterhorse too and love the thing so far. Got it just about a month ago.
 

tealstang67

Member
May 19, 2009
47
0
6
Aug 4, 2009
#8
  • Aug 4, 2009
  • #8
The best i can tell my WB says afr is still virtually the same but the idle is so bad i cannot drive it hardly at all. Does the ic piping and ic add to the manifold volume? I have also been reading up on the idle procedures and TB air flow and also dash pot settings but not to willing to start changing things till i feel like i am heading in the right direction. Any way any thoughts would be great.
 
You must log in or register to reply here.

Similar threads

I
1994 Cobra - Fuel Pressure Drops Revving at Idle
  • IconicSilverGT500
  • Apr 11, 2026
  • 1994 - 1995 Specific Tech
Replies
16
Views
362
1994 - 1995 Specific Tech Apr 24, 2026
Mcmahst
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
31
Views
747
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 21, 2026
86_Capri
T
Help with a 95 5L crank no start
  • TheBubbaJoe
  • Nov 4, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
394
1994 - 1995 Specific Tech Nov 5, 2025
AeroCoupe
P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
233
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
129
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?