• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Did the fog light mod lastnight

  • Thread starter Thread starter Twista
  • Start date Start date Jul 19, 2009

Twista

Active Member
May 7, 2004
510
2
29
@ the z00 in chicago
Jul 19, 2009
#1
  • Jul 19, 2009
  • #1
Sadly, it took me some hours. Word of advise.. f the butt connectors. I couldn't get the crimps correct so i just brought some caps and twist wired everything than capped it off.

Also, if you have a vert make sure you dont cut the vert power wire (orange/purple) to short because youll have serious problems at the end. I ended up adding some wire to this and twist tying it than capping it off.

All is well.

Mustangworld Fog light re-wire
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,390
3,536
233
Jul 19, 2009
#2
  • Jul 19, 2009
  • #2
Yup, good mod to do. Only downside is the ash tray light turns off when the brights are on.
 

Twista

Active Member
May 7, 2004
510
2
29
@ the z00 in chicago
Jul 19, 2009
#3
  • Jul 19, 2009
  • #3
LaserSVT said:
Yup, good mod to do. Only downside is the ash tray light turns off when the brights are on.
Click to expand...

What you mean ash tray? Also, if i add FOG hids would this setup still work? Being that its on the vert power line (i have a vert also)
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Jul 19, 2009
#4
  • Jul 19, 2009
  • #4
Twista said:
Sadly, it took me some hours. Word of advise.. f the butt connectors. I couldn't get the crimps correct so i just brought some caps and twist wired everything than capped it off.

Also, if you have a vert make sure you dont cut the vert power wire (orange/purple) to short because youll have serious problems at the end. I ended up adding some wire to this and twist tying it than capping it off.

All is well.

Mustangworld Fog light re-wire
Click to expand...

I hope you warped those twist caps really well with electrical tape or you will get shorts.

Even butt connectors are a bit sketchy ( ford recommends soldering all connections)
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,390
3,536
233
Jul 19, 2009
#5
  • Jul 19, 2009
  • #5
Twista said:
What you mean ash tray? Also, if i add FOG hids would this setup still work? Being that its on the vert power line (i have a vert also)
Click to expand...
Oh! Didnt realize thats where tou tapped power from. For the 94-97 Coupes the mod is to remove the pin for the ash tray light plug and swap it in place of the one that normally feeds the fog light then put the fog lights pin in the ash trays plug. That allows the fogs to be run with only the parking lights on and allows them to stay on with the brights but since the car emoves power from the fog lights when the brights go on now it removes power from the ash tray light
With your mod you dont have that issue.
 
0

007

Founding Member
Jan 29, 2002
3,287
24
69
Broke
Jul 19, 2009
#6
  • Jul 19, 2009
  • #6
Twista said:
Sadly, it took me some hours. Word of advise.. f the butt connectors.
Click to expand...


Were you using a crimping tool for the butt connectors or just regular pliers? They suck with pliers, but work very well with crimping tools. I would wrap them generously with electrical tape afterward.

So this lets you drive around with fogs on but no head lights on? Might be good when I finally get the Roush Stage 3 nose installed.
 

Twista

Active Member
May 7, 2004
510
2
29
@ the z00 in chicago
Jul 19, 2009
#7
  • Jul 19, 2009
  • #7
007 said:
Were you using a crimping tool for the butt connectors or just regular pliers? They suck with pliers, but work very well with crimping tools. I would wrap them generously with electrical tape afterward.

So this lets you drive around with fogs on but no head lights on? Might be good when I finally get the Roush Stage 3 nose installed.
Click to expand...

ya you can drive with either the fogs on by there selfs or the amber+fogs on.

No, i didnt use electrical tape, but i have to undo it today to check something so ill re-touch the caps with the tape
 
0

007

Founding Member
Jan 29, 2002
3,287
24
69
Broke
Jul 19, 2009
#8
  • Jul 19, 2009
  • #8
Twista said:
ya you can drive with either the fogs on by there selfs or the amber+fogs on.

No, i didnt use electrical tape, but i have to undo it today to check something so ill re-touch the caps with the tape
Click to expand...

So if they are totally independent then you could have your high beams on and still use the fogs too huh?
 

Twista

Active Member
May 7, 2004
510
2
29
@ the z00 in chicago
Jul 19, 2009
#9
  • Jul 19, 2009
  • #9
007 said:
So if they are totally independent then you could have your high beams on and still use the fogs too huh?
Click to expand...

Dunno, let me check. I never use my highbeams because my low beams are hids and my high beams are halogens. When you use the highbeams the lowbeams HIDS stay on so it looks funky
 

Twista

Active Member
May 7, 2004
510
2
29
@ the z00 in chicago
Jul 19, 2009
#10
  • Jul 19, 2009
  • #10
yes they work with the brights on
 
You must log in or register to reply here.

Similar threads

J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
19K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
Progress Thread Code Gremlins Finally Fixed (Progress Update)
  • sav22rem22
  • Jan 27, 2021
  • Fox 5.0 Mustang Tech
Replies
3
Views
1K
Fox 5.0 Mustang Tech Feb 3, 2021
90sickfox
P
Progress Thread My First Project Car And My First Fox
  • pierce.corgan
  • May 27, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2021
Potomus Pete
V
A 20 year old car, with many faults!
  • Virus101
  • May 4, 2020
  • SN95 4.6L Mustang Tech
Replies
7
Views
2K
SN95 4.6L Mustang Tech May 9, 2020
Cobra262
C
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?