• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

Did the mechanic screw me?Need my car help!

  • Thread starter Thread starter racer_inboston
  • Start date Start date Jan 13, 2007
  • 1
  • 2
Next
1 of 2 Next Last

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 13, 2007
#1
  • Jan 13, 2007
  • #1
Hey guys,
I have a 1993 lx 4 cyl n/a. I bought it cheap for driving back and forth to work. It drove ok before but i put new plugs (I did change them 1 by 1 and matched lenth of new ones to the old ones 1 by 1) drove fine for 2 weeks, It failed inspection due to the parking brake so I took it to have a local mechanic's fixed it. The mechanic gave me an estimate over the fon for the Job after keepinmg the car overnight. the estimate was $400 I was like you said $250 tops this morning. He denies telling me that so I told him I would go for my car today. I get in it and it DRIVES like CRAP! hesitates and when it does start to pick up it ticks from the pass side rear of the motor. On idle under the hood the sound is loud from that side.

I just know for a fact he did something...where should I start looking?

Thanks friends.
 

Shawneebear93

20+ Year Stangneter
May 4, 2004
518
17
49
40
Salisbury Twp, Allentown, PA
www.cardomain.com
Jan 13, 2007
#2
  • Jan 13, 2007
  • #2
Well ... just to be sure we cover all bases here (and not to perceive you as some dumbass) but concerning the hesitation and barely moving, the parking brake is not pulled up (in the on position), correct?
 

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 13, 2007
#3
  • Jan 13, 2007
  • #3
Correct. There is no cable and yes the e-brake handle is on its disangaged position. Yeah man I think he screwed me by swaping ignition wires for not letting him do my e-brake. Just not too familiar with this set up to pin point it. I know I have to go out there tomorrow to fix it but want to be ahead of the game. ANd thanks so much all info would be kind.
p.s
gonna go and check for ark as soon as it gets dark, the bastard might have sliced a boot and one of the wires might be arching the block.
 

Keasbey

Member
Jun 12, 2003
915
0
16
40
Montreal
Jan 13, 2007
#4
  • Jan 13, 2007
  • #4
Yeah take a look at each wire. see if he didn't loose a spark plug.

If I were you, I would go to another mecanic.
 

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 13, 2007
#5
  • Jan 13, 2007
  • #5
Keasbey ,

Yes I know about going to another mechanic to have the work done. Still the issue here is not the e-brake, the issue here is the car was running good when I left it there and it spattered and hesitated as soon as I took it around the corner.

ok guys, I just starter up the car in complete darkness, there is no arc anywhere. tomorrow i will check firing order which should be 1,3,4,2 I bet he just swapped plug boots on me at the coil or at at the motor.

any mor einfo you guys think I should check let me know. The guy had about 30 miutes from when I first told him I didn't want him to do the work to when I picked up the car.
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Jan 14, 2007
#6
  • Jan 14, 2007
  • #6
sounds like when I changed my plugs and accidentally pulled off the connector to the fuel injector. check those . they are on the intake side of the engine.
 

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 14, 2007
#7
  • Jan 14, 2007
  • #7
I changed the plugs weeks ago, car ran fine until 2 days ago when I took it to this mechanic to check fix my"E" brake. Believe me he unplugged somehting or switched someyhing so that I would be stuck having him fix the "e" brake and this new fuel/ignition problem. I will check in a few for firing order and will also check the fuel injectors
 

Brantley

Founding Member
Feb 29, 2000
1,329
0
0
Memphis, TN
www.binaryweb.com
Jan 14, 2007
#8
  • Jan 14, 2007
  • #8
You don't have to wait until dark to see if it's arcing.. just get a spray bottle with water in it and gently spray it over the igition system while the engine is runnnig. If it has been or is arcing, you'll find it.
 

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 14, 2007
#9
  • Jan 14, 2007
  • #9
There is no arching. I also checked the injectors. Last are the spark plug wires in question. I attached a pic of the engine coils, just don't know which is which on the coil since they are NOT marked. I attahced a pic so someone can help me designate the proper order of plug wires to coil connector . Thanks guys I really need this car fixed by tomorrow
 

Attachments

  • 11111111.webp
    38.9 KB · Views: 176

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 14, 2007
#10
  • Jan 14, 2007
  • #10
this is the plug to cylinder order in which my car is right now. Does it look correct? I know that in this foreum there are about 3 diff diagrams, but none match what I reaserched under my hoos today. Here is how thery are hooked up.

4 1
3 2
-----
2 3
1 4

looking at the coilpacks standing in front of the engine and following each wire designate order.
DOes this look correct?
 
R

RustBucket

New Member
Jun 8, 2003
585
0
0
57
Buford, GA
Jan 14, 2007
#11
  • Jan 14, 2007
  • #11
That doesn't look right.

Try this:

Facing the front of the motor and starting at the back coil pack it should look like this

2E | 1E
-------- Rear coil pack top row is closest to firewall.
3E | 4E

4I | 3I
------- Front coil pack Top row is against rear coil pack.
1I | 2I

I=intake side
E=exhaust side.

See if that straightens you out. That's how mine's arranged.
 

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 14, 2007
#12
  • Jan 14, 2007
  • #12
Negative, I did them per your diagram :
3E | 1E
-------- Rear coil pack top row is closest to firewall.
2E | 4E

4I | 2I
------- Front coil pack Top row is against rear coil pack.
1I | 3I

I=intake side
E=exhaust side.

AND IT DIDN'T START. I feel helpless , what else can I try?
 
R

RustBucket

New Member
Jun 8, 2003
585
0
0
57
Buford, GA
Jan 14, 2007
#13
  • Jan 14, 2007
  • #13
Double check it. I edited the original post earlier. I wrote it down wrong. Sorry.
 

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 14, 2007
#14
  • Jan 14, 2007
  • #14
RustBucket ,

The car didn't even start. I set it back to:
4 1
3 2
-----
2 3
1 4

and that way it will stay running, but like I said give it gas and it sputters and runs like crap. HELP this car is a 1999 convertible lx 4 cyl, what IS the correct order? anyone?
 

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 14, 2007
#15
  • Jan 14, 2007
  • #15
This is the order in which the coils are and the only way it starts. I tried all of the above combinations and it doesn't start. attached is a pic . runs ****ty but runs.

4 1
3 2
----
2 3
1 4
 

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 14, 2007
#16
  • Jan 14, 2007
  • #16
bump any one?
 
P

Ponycar

Founding Member
May 4, 2002
90
0
0
Virginia Beach VA
Jan 14, 2007
#17
  • Jan 14, 2007
  • #17
this is from my haynes manual
 

Attachments

  • 2.3 DIS.webp
    17.9 KB · Views: 172

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 15, 2007
#18
  • Jan 15, 2007
  • #18
I will try this when I get home, thanks.
 

racer_inboston

Founding Member
Feb 2, 2002
310
0
16
boston, ma
Jan 16, 2007
#19
  • Jan 16, 2007
  • #19
I tried every combination you guys gave me, but hti sis the only order in which the car runs fine. I have a bad exhaust leak at the header but which i htink is makin git bogg a bit. If anyone can elaborate more as to why every ones diagrams or manuals show different than what is working for me, please do. I guess now I gotta go and post "e-brake cables remove and install" next.

thanks.

4 1
3 2
-----
2 3
1 4
 

Attachments

  • DSC01316.webp
    21.9 KB · Views: 169
P

Ponycar

Founding Member
May 4, 2002
90
0
0
Virginia Beach VA
Jan 16, 2007
#20
  • Jan 16, 2007
  • #20
dunno....my 93 is wired as per manual
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

S
Need help and Advise - 89 Problem Child
  • Sheela
  • Oct 28, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
157
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 28, 2025
evintho
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
138
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
M
Too much for me to repair in my current housing situation
  • My Drama Magnet 04 Gt
  • Apr 1, 2026
  • The Welcome Wagon
Replies
8
Views
297
The Welcome Wagon Apr 14, 2026
Noobz347
T
Help with a 95 5L crank no start
  • TheBubbaJoe
  • Nov 4, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
453
1994 - 1995 Specific Tech Nov 5, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?