• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Diff Bushings.......Porta-Power?

  • Thread starter Thread starter TrophyHead
  • Start date Start date May 29, 2006

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
May 29, 2006
#1
  • May 29, 2006
  • #1
I'm changing out my differential bushings. The MM tool is garbage. I stripped the threads on the bolt. I have another 1/4 inch to go. It's going in straight as an arrow.

Do they sell some sort of porta-power to press this bushing into place?

I'm pretty pissed off about this goofy MM bushing removal tool. First off why the hell is it fine thread. And there instructions suck.

I'm wrenching the balls off this bushing and I'm worried about breaking the cast iron ears. Any idea's?

Edit: I used a die-grinder to clean up the inside of the ears. I'm also sparying WD-40 while trying to press it in.
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
May 29, 2006
#2
  • May 29, 2006
  • #2
My new diff bushings went in fine with a rubber mallet after I cleaned up the inside of the ears with sandpaper.
 
N

new46stang

Member
Jun 5, 2002
146
0
17
AZ
May 29, 2006
#3
  • May 29, 2006
  • #3
I used a socket the same size of the bushing and a 3lbs sledge. Lube it up with some WD-40 as you said and tap tap taparoo.... My problem was getting the old ones out. I went out and bought a cheap air hammer. 2 seconds of work once I had that.
 
M

macx

New Member
Jul 18, 2004
228
0
0
SE Missouri near Cape Girardeau
May 29, 2006
#4
  • May 29, 2006
  • #4
Here's how I did mine.

To make putting the new ones in easier, put them in a
cold freezer for an hour or so, then lube them with something
and they should tap right in no problem

http://www.lincolnsonline.com/tech/00074.html
 
You must log in or register to reply here.

Similar threads

Suspension upper axle bushings wont go in
  • Stopman33
  • Mar 4, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
792
Fox 5.0 Mustang Tech Mar 9, 2025
stormsedge
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
3
Views
2K
SN95 Mustangs For Sale (1994-04) Aug 17, 2026
Labora
Front control arm bushing replacement
  • GT80
  • Dec 17, 2018
  • Fox 5.0 Mustang Tech
Replies
3
Views
10K
Fox 5.0 Mustang Tech Mar 1, 2019
GT80
Brakes 1979-1986 Fox Parking Brake Adjustment
  • LiquidStangs
  • Sep 22, 2019
  • Fox 5.0 Mustang Tech
Replies
1
Views
10K
Fox 5.0 Mustang Tech Sep 23, 2019
LX Dave
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?