Dizzy issues...

[Killer50stang]

ftp://ftp.pothsprojects.com/dizzy 001.jpg
ftp://ftp.pothsprojects.com/dizzy 002.jpg
ftp://ftp.pothsprojects.com/dizzy 004.jpg

Here's where I'm at. I got it half way, I've heated it and still not luck. I was able to get the cam out. I've also hit the back and put a small dent on the crank size, hope this can be fixed or won't hurt anything, it is small. Can I hit this from the bottom while the motor is upside down?

 

[GearHd6]

Damn, that thing looks coroded BIG TIME. If you can hit from the bottom go for it. But remember if you mar up the bottom its not going to come out very good.

 

[bill302]

i think i would soak it with some pb blaster for a while and then heat it a little to help the pb blaster to penetrate.then try to strike it from the bottom to remove.i have never seen one that bad...

 

[Killer50stang]

Yeah, I guess this is common on a 351M motor. This is going to be going to a machine shop. Won't they do this for me? I don't want to hurt the block...