Do 1.6 rolloer rockers clear stock valve covers???

i was using 1:7 proforms(junk) and they hit...... so i got a set of fox body V'C's.

But now im using crane 1.7's and as far as i know, they will fit because 94-95 cobras came with them and used the stock valve covers

There is very little room under the OEM VC's

Some RR's are bigger than others

I could not say about Scorpion peds
but
I can tell you my Scorpion Stud Mount RR's are very large

My guess would be ... they won't fit

I'd do a search using Scorpion on all the 94-95 boards

Grady

GreenMustangGt said:

i was using 1:7 proforms(junk) and they hit...... so i got a set of fox body V'C's.

But now im using crane 1.7's and as far as i know, they will fit because 94-95 cobras came with them and used the stock valve covers

Click to expand...

I installed 1.7 proforms a couple weeks ago and got them to fit by working four of them a little. I used a dremel and ground an angle on the ones at each end of the head so the VC would fit. I also used a double thick VC gasket. I didn't have to remove the oil baffle. I took pics of what I removed from the roller rockers but they're at home. I'll have to post the pic later.