• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Do I Have A Chance?

  • Thread starter Thread starter Detroiit
  • Start date Start date Jun 11, 2014
  • 1
  • 2
  • 3
  • …
  • 6
Next
1 of 6 Next Last

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jun 11, 2014
#1
  • Jun 11, 2014
  • #1
Hey fellow stang lovers I bring to you my quandary. I recently picked up a 90 mustang, it seems pretty quick(im used to driving a 03 fx4 f150) and runs well.. Several guys at work are talking trash they are chevy and mopar guys.. One has a stock 08 srt8 charger. The whole group is calling me out to race him, talking down on the Ford. I'm going to race him either way. My question is Do I Have A Chance at winning or will I just get blown out?

I have decent driving skills and the car was modified from previous owner with 10k miles on rebuild and 122xxx on the body. It has some parts that I wouldn't of necessarily put on but here is the list:

5.0l V8 rebuilt bored .030 over about 10k miles on rebuild.
Ford racing aluminum x302 heads with crane 1.7 roller rockers
E303 cam
Under drive pulleys.
Ford racing polished cobra upper lower intake
70 mm throttle body
73mm maf calibrated for the 30lb injectors.
30lb injectors. With walboro 255 high out put fuel pump adjustable fuel pressure reg.
Canton 7qt oil pan with high flow oil pump.
BBK shorty headers/BBk off road X pipe with duel flowmaster 50 series It is loud and the engine has that nice lopey idle .
Tremec T5 HD zspec 5 speed trans/with fresh stage 2 clutch. Hurst shifter.
3.55 rear gears.
Light weight aluminum drive shaft .
5 lug conversion with factory cobra 17x9 rims
cobra front brakes duel piston calipers
Full length weld sub frame connectors
BBK upper/lower rear control arms.
BBK lowering springs lowered 1.25"

Decent stock tires 17in cobra wheels, and It does have all black factory interior! (lol)

Can this set up win or will I just lose and have to deal with it? Maybe a close second even tho second is the first loser..

Let me know!

Thanks
Ken
 

7upstang91

10 Year Member
May 30, 2008
936
124
74
Florida
Jun 11, 2014
#2
  • Jun 11, 2014
  • #2
Yeah, probably not going to happen.
 
Reactions: tamadrummer88

smkshw

5 Year Member
Feb 12, 2010
1,095
235
94
Jun 11, 2014
#3
  • Jun 11, 2014
  • #3
go to a track and find out....all in the fun anyway,but i wouldnt brag if i were you...
 
Reactions: tamadrummer88

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jun 11, 2014
#4
  • Jun 11, 2014
  • #4
smkshw said:
go to a track and find out....all in the fun anyway,but i wouldnt brag if i were you...
Click to expand...

Who was bragging? I am very modest..
 

smkshw

5 Year Member
Feb 12, 2010
1,095
235
94
Jun 11, 2014
#5
  • Jun 11, 2014
  • #5
Detroiit said:
Who was bragging?
Click to expand...
didnt say you did,just saying dont....that makes things worse if you loose...lol
 

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jun 11, 2014
#6
  • Jun 11, 2014
  • #6
smkshw said:
didnt say you did,just saying dont....that makes things worse if you loose...lol
Click to expand...
copy that.. even if i would win I would say i got lucky.. Im like that...
 

Stay Shady

Member
Mar 28, 2014
33
7
19
Litchfield, IL
Jun 11, 2014
#7
  • Jun 11, 2014
  • #7
If its stock, I would say that you could beat him.
 
Reactions: f8tlfiveo

smkshw

5 Year Member
Feb 12, 2010
1,095
235
94
Jun 11, 2014
#8
  • Jun 11, 2014
  • #8
Detroiit said:
copy that.. even if i would win I would say i got lucky.. Im like that...
Click to expand...
i did that once,tried to get my buddy out to the track for a long time,he had a bone stock 99 camaro,he always talked smack too,i had to talk smack back to get him out,i was sure it was gona be close,he barley even washed it or gave it an oil change,he smoked me...lol....built a new engine since then but he still has it on tape!....still get hassled about it till this day...
 

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jun 11, 2014
#9
  • Jun 11, 2014
  • #9
smkshw said:
i did that once,tried to get my buddy out to the track for a long time,he had a bone stock 99 camaro,he always talked smack too,i had to talk smack back to get him out,i was sure it was gona be close,he barley even washed it or gave it an oil change,he smoked me...lol....built a new engine since then but he still has it on tape!....still get hassled about it till this day...
Click to expand...
but now u have that memory with ur buddy and thats the real winner.
 

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jun 11, 2014
#10
  • Jun 11, 2014
  • #10
Also.. what do you all think Hp and 1/4 mile time would/should be with that set up.. Its not tuned yet.. Im going at the end of July to Lidio at Alternative(they real busy). I'm pretty sure his car is running 13.2 and thats with a professional driver.. so..
 

smkshw

5 Year Member
Feb 12, 2010
1,095
235
94
Jun 11, 2014
#11
  • Jun 11, 2014
  • #11
Detroiit said:
but now u have that memory with ur buddy and thats the real winner.
Click to expand...
yup...glad he came out...he was auto and i was stick,he got me off the line cause i burnt through 1st and second to start,but regardless i lost...lol
 

Detroiit

Active Member
May 27, 2014
305
59
38
Detroit MI.
Jun 11, 2014
#12
  • Jun 11, 2014
  • #12
smkshw said:
yup...glad he came out...he was auto and i was stick,he got me off the line cause i burnt through 1st and second to start,but regardless i lost...lol
Click to expand...
lesson learned
 

RangerJoe

I leave the horn on while driving
15 Year Member
Apr 26, 2010
2,560
1,146
184
Georgia
Jun 12, 2014
#13
  • Jun 12, 2014
  • #13
If you had a sticky tire and drove the day lights out of it you could beat him, but that's hoping he would be spinning. Most drivers cannot duplicate the times in magazine test articles without some real practice and experience.

Joe
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Jun 12, 2014
#14
  • Jun 12, 2014
  • #14
I think you will take him off the line but the top end on that srt is going to rape you.
 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Jun 12, 2014
#15
  • Jun 12, 2014
  • #15
Car And Driver did a comparo against the 08 GT 500 back in the day. Their best drivers could only manage a very low 13 out of the heavy Dodge.
http://mustangs.about.com/od/modelyearprofiles/a/gt500vschallngr_3.htm
The Challenger will have T/C, and you will have tire spin. Unless you are VERY experienced in keeping that in ck, your race will be lost in the first 60'.
(And I do so hate to lose watching the tail lights of my opponent the entire 1/4 mile.)
Now like Joe says, get it at a track and show up w/ experience, and a set of ET streets, drive the hell out of it, and you may have a prayer.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,016
1,613
194
NJ
Jun 12, 2014
#16
  • Jun 12, 2014
  • #16
Unless you have a seriously narrow set of drag radials, i'd say you are unlikely to win.

I wouldn't worry about tuning, but i would back the injectors down to 24's and use a pro m meter. Could make a major difference.
Then with some real tires you should win. You probably have a 1000lb advantage, but you will need traction. Some nittos or BFG drag radials on your current wheels should do.

People underestimate x heads, while not the norm for everyone i did know someone with a car that went 11.98 on a stock shortblock with an E cam, gt40 tubular, x heads (valve jobbed), pro m bullet with 24's.
 

elarm1

10 Year Member
Dec 17, 2010
1,428
652
154
N.Va
Jun 12, 2014
#17
  • Jun 12, 2014
  • #17
My bud had a SRT8 auto Chally..... From a dig in Mehico I pulled a car on him. So its possible
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Jun 12, 2014
#18
  • Jun 12, 2014
  • #18
you are going to have to cut a great 60ft. remove all unecessary weight. only have 1/4 tank of gas. Buy a shorter belt for the track and bypass the a/c and smog pump. Ice down the intake. Bump the timing to 14 to 16. Put a splash of 106 in it. Disconnect one side of the front sway bar link. pump up the front tires to 40 and lower the rears- if street tires to 28. Get a set of DR if possible If on street tires just clean them off dont do a big burnout and don't launch at 4000 or youwill spin the first 60. You will probably go through the traps in 4th.

Last drive it like you stole it. It's all about the driver

oh.. and get rid of those crappy ignition wires and get a set ot Taylors.
 
Reactions: 90lxwhite and A5literMan

elarm1

10 Year Member
Dec 17, 2010
1,428
652
154
N.Va
Jun 12, 2014
#19
  • Jun 12, 2014
  • #19
@mikestang63 Good superb advice!
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,213
17,895
224
Massachusetts
Jun 12, 2014
#20
  • Jun 12, 2014
  • #20
Havig driven a SRT8 charger, you'r only chance is from a dead stop. They are heavy and take a few seconds to get moving, but once they do they are hauling butt.

I'd have to say that you will see SRT8 taillights....at the track of course

But nice car. Those rims with the pony caps came on the 03-04 GT's as an option. Same as the 01 Cobra
 
  • 1
  • 2
  • 3
  • …
  • 6
Next
1 of 6 Next Last
You must log in or register to reply here.

Similar threads

A
SOLD For Sale: 1993 Ford Mustang Cobra Modified
  • anjteal93
  • Sep 5, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
13
Views
1K
Fox Body Mustangs For Sale (1979-93) Oct 26, 2025
Mindseye007
Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
52
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2025
from6to8
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
  • Locked
Engine Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
422
Fox 5.0 Mustang Tech Jul 8, 2025
Noobz347
Progress Thread Giving an abandoned 88 GT project a new chance at life
  • jaketractor
  • Jan 9, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
27
Views
2K
Fox 5.0 Mustang Tech Jul 20, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?