• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

do i need longer pushrods, why

  • Thread starter Thread starter dastang2
  • Start date Start date Feb 24, 2006

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Feb 24, 2006
#1
  • Feb 24, 2006
  • #1
do i absolutely need to change the pushrods when i put a set of edlebrock performer heads with pedistal rockers on. pushrods are really expensive and something i don't want to get. thanks.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Feb 24, 2006
#2
  • Feb 24, 2006
  • #2
You'll likely be ok with the stock pushrods if the cam is stock; but you won't know for sure til you mock it up and measure. That's what pushrod length checkers are for...
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Feb 24, 2006
#3
  • Feb 24, 2006
  • #3
dastang2 said:
do i absolutely need to change the pushrods when i put a set of edlebrock performer heads with pedistal rockers on. pushrods are really expensive and something i don't want to get. thanks.
Click to expand...
Expensive????
$37.50 for a set of 16 hardened pushrods expensive?
http://store.summitracing.com/partdetail.asp?part=CCA-7826-16&N=115&autoview=sku

I would say cheap insurance if anything.
 

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Feb 24, 2006
#4
  • Feb 24, 2006
  • #4
those were not in the jegs mag. all the ones i saw were over 80
 

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Feb 24, 2006
#5
  • Feb 24, 2006
  • #5
i checked and those were stock length pushrods, i believe i will need a different size, i am using the f cam. and i need .060 of shims under my stock rockers since my block has been milled. somebody said the stock ones ruined his valves and somebody else says they are using them but not sure of problems. i do not want to go through all of this hassle. maybe i can shim the rockers more with the heads if i get them and use the stock pushrods.
 

vikingpower

New Member
Dec 6, 2004
656
0
0
CWU Ellensburg, WA
Feb 24, 2006
#6
  • Feb 24, 2006
  • #6
A set of custom, proper length pushrods is a lot cheaper than wearing out your valveguides, which are not cheap to fix. For an even better example of what happens when valvetrain geometry isnt correctly set up, read HOT ROD this month. They blew up a 5.0 on the dyno by f'ing up the valvetrain, which wore out the exhaust valveguides, which in turn allowed a valve to tag a piston and blew up the engine. Excellent article!
 
G

getusummm

Member
Dec 26, 2004
156
0
16
Feb 24, 2006
#7
  • Feb 24, 2006
  • #7
Lets see if I understand this. You spent $800+ on set of heads, but $80 for pushrods is expensive? I just dont get it.
 

vikingpower

New Member
Dec 6, 2004
656
0
0
CWU Ellensburg, WA
Feb 24, 2006
#8
  • Feb 24, 2006
  • #8
getusummm said:
Lets see if I understand this. You spent $800+ on set of heads, but $80 for pushrods is expensive? I just dont get it.
Click to expand...

 

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Feb 25, 2006
#9
  • Feb 25, 2006
  • #9
getusummm said:
Lets see if I understand this. You spent $800+ on set of heads, but $80 for pushrods is expensive? I just dont get it.
Click to expand...

who said i bought anything, i am researching. i would also need head bolt adapters and either use the stock rockers or get new ones.

i still need to get wheels tires gears and some control arms and have a budget to keep
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Feb 25, 2006
#10
  • Feb 25, 2006
  • #10
You won't know the answer to your question until you get it mocked up and check the correct pushrod length from the checker against your stock set's length. That's the downside of the non-adjustablility of these set ups. You can adjust for a pushrod that's a bit too long by shimming the rocker up. But you can do nothing if they're too short. So when you check, if you have to order new ones, be sure you err on the side of having them be a bit too long...
 

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Feb 25, 2006
#11
  • Feb 25, 2006
  • #11
i still think i am going with thumper heads and not having to worry. i would look for a used set but i wanna make sure they are good and not cracked. i am weary of buying used heads but i am up for it if i can see them. look in my sig.
 
You must log in or register to reply here.

Similar threads

G
Engine Pushrod Length Question
  • germain101
  • Sep 22, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
751
Fox 5.0 Mustang Tech Sep 25, 2025
Noobz347
Engine Pushrod Length?
  • foxbodyclark
  • Jan 25, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
412
Fox 5.0 Mustang Tech Jan 25, 2025
limp
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
617
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Resolved Fixing a GT40P Valvetrain nightmare
  • foxbodyclark
  • May 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
1K
Fox 5.0 Mustang Tech May 24, 2025
limp
J
MEED HELP!! 86 mustang
  • Jacob0121
  • Jan 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
491
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?