Do the hubs need to be pressed back to the drum?

F

FastSVO

Founding Member

Jun 28, 1999

193

3

18

Los Angeles

Oct 18, 2005

#1

• Oct 18, 2005

• #1

I managed to seperate my original '67 brake drums from the hub. So, when installing the new drums, do they just slip over the hub or do they need to be pressed back in.

I also need to buy new wheel studs. Aside from matching up with the original pieces, what are the measurement specs of the stock studs?

Thanks in advance.

Eric

 

krash kendall

Active Member

Nov 19, 2004

1,258

0

36

Aldergrove, B.C. Canada

Oct 18, 2005

#2

• Oct 18, 2005

• #2

Just tell them what car you have and they will give you the appropriate studs. They will pull into position with the lug nuts. The drum should do the same. How did you get the drums off in the first place? We are talking about the front drums right?

 

G

glastang

New Member

Oct 14, 2005

25

0

0

Oct 18, 2005

#3

• Oct 18, 2005

• #3

No on the pressing in they were probaly just stuck, dont know the size of the studs.

 

F

FastSVO

Founding Member

Jun 28, 1999

193

3

18

Los Angeles

Oct 18, 2005

#4

• Oct 18, 2005

• #4

yes, they are the front drums. Looks like I will just re-assemble. Thanks

Eric

 

F

FastSVO

Founding Member

Jun 28, 1999

193

3

18

Los Angeles

Oct 19, 2005

#5

• Oct 19, 2005

• #5

I was checking out my studs today and they are actually in ok/good condition, but they were beat to hell by a heavy sledge (this is how we got the hub to seperate from the drum). So, should I replace them?

 

krash kendall

Active Member

Nov 19, 2004

1,258

0

36

Aldergrove, B.C. Canada

Oct 19, 2005

#6

• Oct 19, 2005

• #6

Yes, studs are cheap and easy to replace. I've had a front wheel come off my mustang once due to overstressed studs. Its easy insurance if you have it apart already.

 

F

FastSVO

Founding Member

Jun 28, 1999

193

3

18

Los Angeles

Oct 21, 2005

#7

• Oct 21, 2005

• #7

Thanks for all responses!

I called around to get the studs replaced and they want around $50 bucks for both sides including studs!! I think that's a little steep. How about if I just tap out and in the old and new studs myself?

Does anyone know of a shop in the Los Angeles area that will not charge an arm and a leg for such a simple job?

Thanks

Eric
:SNSign:

 

krash kendall

Active Member

Nov 19, 2004

1,258

0

36

Aldergrove, B.C. Canada

Oct 21, 2005

#8

• Oct 21, 2005

• #8

As I said above, they will pull into place with the lugnuts. Knock the old ones out with a hammer.