• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Do You Haul A Spare Tire?

  • Thread starter Thread starter gearheadboy
  • Start date Start date Oct 13, 2012
Prev
  • 1
  • 2
First Prev 2 of 2

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Oct 14, 2012
#21
  • Oct 14, 2012
  • #21
RangerJoe said:
Although I haven't done it yet, this is the same idea I am going with. Since I went to 5 lug, the stock four lug spare has no use. I have been kicking around the idea of building a small sub encloser for the spare tire well, which would hold my carpet up. I have a Solo Baric square 8" sub. I think I will make half the spare tire well an encloser, and have a hinged lid that will utilize the other half for storage of the tire pump and plug kit, maybe even a small wrench set. We'll see.


Joe
Click to expand...

I always kept basic tools with the car as well. Including a spare TFI and specific TFI bolt socket...because you never know.
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Oct 14, 2012
#22
  • Oct 14, 2012
  • #22
Spare tire...yes, and up until recently, the stock scissor jack too. That was until it stripped and failed on me a few weeks ago when I was putting the car up to tighten my clutch cable. Threw that baby into the dumpster immediately.

Glad it slipped while I was jacking it up, rather than when I was under the car.

Gonna have to find me a nice bottle jack or something to replace it.
 

Ozz

I think I have a problem here.
Founding Member
Jul 27, 2001
3,514
66
109
Canton, MI
Oct 15, 2012
#23
  • Oct 15, 2012
  • #23
I carry one, but it's still the 4-lug stock one and I've had a 5-lug setup for nearly 8 years. Never had a flat w/the Stang in 12 years of ownership, and if I did I'd just call AAA as I would like to get my money's worth out of them. Saves gas, too
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Oct 15, 2012
#24
  • Oct 15, 2012
  • #24
My car has ridden the tow truck more from mechanical/electrical failures than it has flat tires... SO even if I had a spare it wouldn't save me from the tow truck, haha. I have the same carpet board warpage you speak of, and I've been contemplating a fix myself. Good thread!

Gearbanger 101 said:
Spare tire...yes, and up until recently, the stock scissor jack too. That was until it stripped and failed on me a few weeks ago when I was putting the car up to tighten my clutch cable. Threw that baby into the dumpster immediately.

Glad it slipped while I was jacking it up, rather than when I was under the car.

Gonna have to find me a nice bottle jack or something to replace it.
Click to expand...

You should never be under a car that's supported by a jack, period. I had a buddy that was killed when his Mustang fell on him so I don't mess around with things like that. The car is on level ground with jack stands whenever I'm under it!
 
Reactions: SSeater, madspeed1 and gearheadboy

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Oct 15, 2012
#25
  • Oct 15, 2012
  • #25
NIKwoaC said:
You should never be under a car that's supported by a jack, period. I had a buddy that was killed when his Mustang fell on him so I don't mess around with things like that. The car is on level ground with jack stands whenever I'm under it!
Click to expand...

^This. I've had close calls in the past too. Now, I always use a jackstand as an extra measure of safety when using a jack.
 
Reactions: gearheadboy

MFE92

10 Year Member
Aug 25, 2010
1,094
373
124
Phoenix
Oct 15, 2012
#26
  • Oct 15, 2012
  • #26
Sheeeeit, I even have a 5-foot length of 1x1 with screw sticking out the side at one end so I can place and move the jackstands without getting under the car even for a second. I've had my car slip off a jack twice, and I'm not takin' any chances.
 
Reactions: gearheadboy

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,356
208
114
Ohio
Oct 15, 2012
#27
  • Oct 15, 2012
  • #27
MFE92 said:
Sheeeeit, I even have a 5-foot length of 1x1 with screw sticking out the side at one end so I can place and move the jackstands without getting under the car even for a second. I've had my car slip off a jack twice, and I'm not takin' any chances.
Click to expand...

I had mine slip off the jack when I was sliding the jackstand out, ended up smashing the fuel lines.
 

pearlnotchback

5 Year Member
Dec 18, 2011
319
44
59
Tennessee
Oct 15, 2012
#28
  • Oct 15, 2012
  • #28
I had a flat about two months after I did my 5 lug conversion. Me and my wife were going out to dinner so I pulled over got the "4 lug spare" out and got the jack out then the oh s**t factor hit. I looked at my prostar wheel then I looked at the spare. My wife looked at the spare then looked at me and we both busted out laughing.
 

tca7291

I can see your wieners.
5 Year Member
Sep 1, 2011
1,801
152
143
Raleigh, NC
Oct 15, 2012
#29
  • Oct 15, 2012
  • #29
Given that I use my fox for a DD, I have the factory spare and jack, one of those cheap floor jacks, a pair of jack stands, full socket set and other misc. tools in the back, along with a bunch of spare parts. I travel from my house back up to Maryland pretty often (300mi. journey) so I like to be prepared for anything.
 

gearheadboy

15 Year Member
Jan 15, 2003
1,425
177
84
Greencastle Pa
Oct 16, 2012
#30
  • Oct 16, 2012
  • #30
tca7291 said:
Given that I use my fox for a DD, I have the factory spare and jack, one of those cheap floor jacks, a pair of jack stands, full socket set and other misc. tools in the back, along with a bunch of spare parts. I travel from my house back up to Maryland pretty often (300mi. journey) so I like to be prepared for anything.
Click to expand...
Holy Moley!
 

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,914
1,332
204
a van down by the river
Oct 16, 2012
#31
  • Oct 16, 2012
  • #31
ive got one, just dont carry it
 

tca7291

I can see your wieners.
5 Year Member
Sep 1, 2011
1,801
152
143
Raleigh, NC
Oct 16, 2012
#32
  • Oct 16, 2012
  • #32
Holy Moley!
Click to expand...
Better to be prepared than stranded!
 

pearlnotchback

5 Year Member
Dec 18, 2011
319
44
59
Tennessee
Oct 16, 2012
#33
  • Oct 16, 2012
  • #33
tca7291 said:
Better to be prepared than stranded!
Click to expand...
Stranded sucks
 
Reactions: tca7291

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,107
21,285
234
Box behind Walmart
Oct 16, 2012
#34
  • Oct 16, 2012
  • #34
tca7291 said:
Given that I use my fox for a DD, I have the factory spare and jack, one of those cheap floor jacks, a pair of jack stands, full socket set and other misc. tools in the back, along with a bunch of spare parts. I travel from my house back up to Maryland pretty often (300mi. journey) so I like to be prepared for anything.
Click to expand...

I carry a Triple-A card.
 

tca7291

I can see your wieners.
5 Year Member
Sep 1, 2011
1,801
152
143
Raleigh, NC
Oct 16, 2012
#35
  • Oct 16, 2012
  • #35
Never had a AAA card, and really don't plan on it. Every car I've had was pretty much a project, and 9 out of 10 times I have been able to make my repairs on the side of the road when necessary (the one time I wasn't, I was able to get my dad to give me a tow). When I do have that major breakdown, I guarantee I will wish I had a AAA card.
 

88LX5.Oh

15 Year Member
Dec 30, 2011
1,442
205
94
Arkansas
Oct 16, 2012
#36
  • Oct 16, 2012
  • #36
I forget what the factory board is since I haven't seen mine in so long. Isn't it a type of POS particle board?
Why not substitute it with 1/4 plywood with little support braces going down into the spare tire wheel well?
 
Reactions: gearheadboy

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,356
208
114
Ohio
Oct 16, 2012
#37
  • Oct 16, 2012
  • #37
I have AAA, but live in a Rural Area so cell phone coverage is very spotty at best, wouldnt drive without a spare.
 

ratio411

Founding Member
Apr 21, 2002
3,870
73
109
Pensacola FL
Oct 17, 2012
#38
  • Oct 17, 2012
  • #38
What do the aluminum space-savers usually go for?

I saw one in my favorite junkyard the other day, but forgot to ask what they would want for it.
Maybe I should grab it?

I always keep a spare.
I have some spare spares too, 4 and 5 lug versions, never been on the ground.
I have a habit of taking them in if they are free/near free, and never been used... Mostly because of how many Fox/SN95 cars we have.
 

ratio411

Founding Member
Apr 21, 2002
3,870
73
109
Pensacola FL
Oct 17, 2012
#39
  • Oct 17, 2012
  • #39
Oh, and the board used to cover the spare well is best described as "Masonite" and can be purchased raw, same as plywood.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
414
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
196
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
138
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
79
The Welcome Wagon Jul 3, 2026
5150K
5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?