• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

does my HB sound bad???

  • Thread starter Thread starter Foxfan88
  • Start date Start date Jun 16, 2005

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Jun 16, 2005
#1
  • Jun 16, 2005
  • #1
I noticed my balancer wobbles some, and when i wait in line at taco mayo for my food, i notice the car wobbles from side to side, not much but its noticable, could this be the idle, it idles at like 600, but if i give it some gas to like 900 rpm, it wont wobble. Is the car just a lil unstable since its idling pretty low??
 

nosmatt

Founding Member
Oct 13, 2000
1,356
0
37
Bass Lake, Ca
Jun 16, 2005
#2
  • Jun 16, 2005
  • #2
try it at taco bell, see if the problem persists.











































but seriously, your balancer, if it wobbles at idle, is a pos, and needs to go before your crank snout breaks.
 

flyinghi3

Member
Jan 11, 2003
313
0
17
Manorville, LI
Jun 16, 2005
#3
  • Jun 16, 2005
  • #3
nosmatt said:
try it at taco bell, see if the problem persists..
Click to expand...

 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Jun 16, 2005
#4
  • Jun 16, 2005
  • #4
Well at idle the car should shake a little, thats just what a V8 does, but if it "wobbles" in a persistant pattern, then yeah do what they said.
 

olymaster

New Member
May 15, 2005
179
1
0
columbus ga
Jun 16, 2005
#5
  • Jun 16, 2005
  • #5
cam can make it feel like it wobbles my engine is all balanced perfect and smooth and it wobles at idle
my friends got a 66 gt350 shelby and that 289 wobbles big time
its the cam i tell you
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
Jun 16, 2005
#6
  • Jun 16, 2005
  • #6
If your harmonic balance is wobbling than you better replace it as soon as possible. A bad balancer can cause some serious damage to an engine. My buddies 94GT had a bad balancer and his crank ended up snapping in half one night.
 
D

DouglasOhio

New Member
Jul 25, 2004
116
0
0
Canton Ohio
Jun 16, 2005
#7
  • Jun 16, 2005
  • #7
Yeah replace the HB, mine went bad and wobbled real bad. Threw an 88 dollar autozone balancer, a real nice piece, on and its smooth as silk. The car still shakes tho, all the v8's are doing it thesedays.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Jun 16, 2005
#8
  • Jun 16, 2005
  • #8
How about popping the hood and visually inspecting the balancer? Look for cracks in the elastomer, ring slippage, etc. While running, visually check (eyeball) the balancer for run-out.

Many things can cause shaking. As said, a cam or miss will cause some nice lumpiness.
Good luck.
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Jun 17, 2005
#9
  • Jun 17, 2005
  • #9
HISSIN50 said:
How about popping the hood and visually inspecting the balancer? Look for cracks in the elastomer, ring slippage, etc. While running, visually check (eyeball) the balancer for run-out.

Many things can cause shaking. As said, a cam or miss will cause some nice lumpiness.
Good luck.
Click to expand...

Elastomer??
Ring Slippage??
Run-out???

could someone explain what these mean??
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Jun 17, 2005
#10
  • Jun 17, 2005
  • #10
Foxfan88 said:
Elastomer??
Ring Slippage??
Run-out???

could someone explain what these mean??
Click to expand...
Elastomer: there is a rubber ring between the inner and outer ring on the balancer. It is what keeps the two halves together. If it becomes unbonded, the outer ring (which has the timing marks) can rotate (slip). What often happens is that the ring slides 'backwards' on one half (run-out). So if you were looking at the balancer from the side, it would look like someone hit one side of the outer ring with a hammer (from the front) and the outer ring on that one side slid toward the motor.

With the elastomer (rubber ring), make sure it has no cracks in it and that it is not 'oozing' out of the balancer. That can allow the ring to slip since the bond is compromised.

Good luck.
 

89CopCoupe

Banned
Feb 17, 2004
606
0
0
Post Count City
Jun 17, 2005
#11
  • Jun 17, 2005
  • #11
nosmatt said:
try it at taco bell, see if the problem persists. ....
I'm sorry, that needed another chuckle
Click to expand...
Click to expand...
 
You must log in or register to reply here.

Similar threads

D
Engine Serpentine belt squeal after reinstall?
  • dqureshi06
  • Oct 30, 2024
  • Fox 5.0 Mustang Tech
Replies
15
Views
869
Fox 5.0 Mustang Tech Nov 1, 2024
Noobz347
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
Buying with a bad motor?
  • djj62478
  • Mar 8, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
256
1996 - 2004 SN95 Mustang -General/Talk- Mar 11, 2026
TTSaleen
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
173
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
522
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?