Thank you for bringing that up. I looked more into it and i believe you are correct. i nearly purchased a '93 harness. Luckily you said something and i compared the listing to my v6 harness and noticed it looked different. Whew, that saved me $150 + shipping . Feels great to know this . Thanks .Well @Turbo_Charged_95 you would be incorrect. I've dropped a 95 Cobra drivetrain into a 3.8 shell, and have been driving it for more than 10 years. To answer your question, all 1994 and 1995 dashboards are identical - it's how Ford managed to save money in those years. You can have a wiring difference depending on the sound system installed, but all 1994-1995 dashboards will bolt up and work just fine.
96-98 dashboards have different wiring, but if you have your old dash you can always swap the wiring harness from one to the other.
the engine harness is nowhere close to being the same. I’ve got a 94/95 harness id give you if you cover shipping. Shoot I might have 2.
I was referring to the post above mine.Absolutely correct! But OP was asking about the dash harness, and not the engine harness.
That would be absolutely great . Those things can be pricey even for a used condition . It's bad enough that a used A9L e.c.u. ran me $200 .the engine harness is nowhere close to being the same. I’ve got a 94/95 harness id give you if you cover shipping. Shoot I might have 2.
The dash/ECU-to-engine harness.Absolutely correct! But OP was asking about the dash harness, and not the engine harness.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?