woooo thats a reallly biiatchhhhh.....do the double nut trick...out if yours was like mine that wont fully do the trick...be prepared with a blow torch and a hammer to tap it a little...mine ended up being bent on the end....
Heres what i did....stood on pass side and pulled,(once the double nuts were reallly tight) but the stud was gonna snap (was bending)....so while your reaching and pulling, u gotta get a hammer and hold that against the stud to stop it from bending....thats BARELY got mine out
But hopefully u wont have a mess like me
Good Luck
that long ass stud might also pull out the insert that it's screwed into. Depends on how rusty it is in there. Mine came out so I bought a HUGE ass bolt to attach the ac kit. If this happens to you, buy the big bolt and open up the hole in the ac kit a bit to clear the new bolt. Good luck!