Getting ready for a cam swap in my 99 GT. I'm new to the modular motors and was wandering if anyones got a walkthrough to swap out the stock cams. A website or anything would be very useful. Also, any tips I should know and how difficult is the install? Thanks in advance.
This Cam Retention tool is a hot ticket for changing out cams without removing the front cover. There's a write up on it to at Modulardepot. http://www.andersonfordmotorsport.com/46-index
This Cam Retention tool is a hot ticket for changing out cams without removing the front cover. There's a write up on it to at Modulardepot. http://www.andersonfordmotorsport.com/46-index
Have some help, have a full weekend for the job, have LOT'S of patientce and LOT'S of beer. Good luck and make sure you have lots of ziplock bags for all the bolts and lable the bags. Label everything if your not 100% sure you'll remember where it goes. I have not done this yet so I can't offer much advice other than read the write ups over and over again til they are burned into the back of your mind. Good luck