Donor car options for v8 conversion?

Klfdesign · Oct 22, 2020

Looking to convert my 1964 1/2 straight 6 mustang coupe to a v8. Hoping to find a donor car to use. Want to keep a manual transmission. This isn’t a show car, just a fun car I love. Anyone have suggestions for donor cars that will let us switch over the majority of needed parts.
thanks to anyone who has ideas

kiddiccarus · Oct 23, 2020

SOOOOOOOO

Location in the CA
Does the Straight Six still work fine?
What are you plans for that engine?

Asking because I others here may be interested in that engine. ( I am TOO far away for the drive )

wicked93gs · Oct 23, 2020

Unless you buy an entire mustang parts car with a rotted body but a good engine and suspension I doubt you will find the majority of the pieces needed on one car:

1. SBF v8 motor 289/302/351
2. 8" rear end(or 9" if you can find one) the I6 rear will die in short order behind the torque of a v8
3. Since you have to have the 5-lug rear, you must now convert to 5 lugs on the front...meaning v8 spindles, drag link, tie rods, idler arm, etc.

One of those conversion you are better off collecting the pieces one at a time when they show up on facebook marketplace or craigslist at a good price.

2Blue2 · Oct 23, 2020

Klfdesign said:
suggestions for donor cars that will let us switch over the majority of needed parts.

wicked93gs said:
buy an entire mustang parts car with a rotted body but a good engine and suspension

As stated it would need to be a 65 or 66 v8 mustang for stuff thats fits

wicked93gs said:
you are better off collecting the pieces one at a time

Buy engine+ transmission+ rear off craigslist locally
Buy spindles off Fleabay
brakes, front suspension, from a vendor.

Join local Classic Mustang club for access to people who horde this stuff localy.

rbohm · Oct 23, 2020

Klfdesign said:
Looking to convert my 1964 1/2 straight 6 mustang coupe to a v8. Hoping to find a donor car to use. Want to keep a manual transmission. This isn’t a show car, just a fun car I love. Anyone have suggestions for donor cars that will let us switch over the majority of needed parts.
thanks to anyone who has ideas

i think that when you actually add up the cost of parts and labor to convert to a V8 from a six, you will find that the effort isnt really worth it money wise. even with a donor car. remember that even with a donor car you are going to be rebuilding/replacing parts, and that costs money. check out this thread for more information;

Sticky: I6 to V8 conversion

I6 to V8 conversion Ok, since we get asked this question about 9 times a day, I talked to the mod and got permission to start a sticky thread for this. What will I need to convert my 1964 1/2 to 1970 Mustang to a V8 ? Power Plant: You are going to need a complete engine. This means...

www.stangnet.com

personally i would keep and hop up the six instead. the six can make decent power, enough to surprise some V8s, and you can bolt a T5 behind teh six with the right parts, modern drive line can help with that. the stock 7 1/4" rear end can handle a decent amount of power, nothing like an 8" but a modified six is no problem. the nice thing about keeping the six is that you dont have to replace a lot of little parts like spindles, and then match the wheel bolt pattern.

if you want ideas for building the six let me know.

kiddiccarus · Oct 23, 2020

@rbohm Agree that is why I kept my Vert as a 6. Once it goes tits up I will burry it and join the dark side with a V8

RaggedGT · Oct 23, 2020

kiddiccarus said:
@rbohm Agree that is why I kept my Vert as a 6. Once it goes tits up I will burry it and join the dark side with a V8

So in the eventual future-after I’ve finally put the mustang back together-and make that long-long-long trip to your shop for tires and a alignment, you want me to unhook 2 plug wires and help ease you over to the dark side?

kiddiccarus · Oct 23, 2020

RaggedGT said:
So in the eventual future-after I’ve finally put the mustang back together-and make that long-long-long trip to your shop for tires and a alignment, you want me to unhook 2 plug wires and help ease you over to the dark side?

As long as you bring me a dose of penicillin to get past all the rust on that Ragged bucket

RaggedGT · Oct 23, 2020

kiddiccarus said:
As long as you bring me a dose of penicillin to get past all the rust on that Ragged bucket

It’s less rusty than my truck

Klfdesign · Oct 25, 2020

kiddiccarus said:
SOOOOOOOO

Location in the CA
Does the Straight Six still work fine?
What are you plans for that engine?

Asking because I others here may be interested in that engine. ( I am TOO far away for the drive )

Sounds like the doner car might not be worth it. I guess I’m now starting the long project of collecting parts. Thanks to all who gave me ideas. Once we have enough to start, I’ll sell my original parts and hopefully recoupe some costs.

MARKDTN · Oct 26, 2020

I did this with mine. Was an original 6/3sp manual. I converted to 5.0/AOD. There is a whole lot to change. At least: rearend, motor stands, exhaust manifolds, radiator, front sump oil pan, transmission-besides the engine. Most of this is Mustang unique. Then you get may as well go discs in front to match the 5-lug rear. May as well put an Explorer rear because it's cheaper than a 9". Dual master cyl. Exhaust vs brake lines. Fuel line. Steering changes. Oil pump while pan is off, timing chain while cover is off...... I should have left mine alone. The 6 was fresh rebuilt when he hit a deer.

As far as donor cars, if you want carbureted 302 maybe find an LTD or Grand Marquis with low miles and use that. Maybe add a small cam and intake. Or later 80s vans if you can find a conversion van with low miles. It may have a roller cam. Get a cam eccentric and mod the front cover for fuel pump and front dipstick. Swap intakes.

If you want fuel injection then there are a bunch of cars out there with 5.0 EFI engines. Mustang, Cougar, Lincoln, Marquis, T-bird, F150, Vans.... All have pluses and minuses. Most have lots of miles. Might find a low mile little-old-lady car or conversion van that is a rustbucket with a good engine though with some patience. Lots of articles on this. Computer behind the dash, new fuel tank with a pump.

Donor car options for v8 conversion?

Klfdesign

New Member

kiddiccarus

The first widely accepted Tranny

wicked93gs

2Blue2

will be trying this sex one when I can find it

rbohm

Sticky: I6 to V8 conversion

kiddiccarus

The first widely accepted Tranny

RaggedGT

Been here over a DECADE and still no CT

kiddiccarus

The first widely accepted Tranny

RaggedGT

Been here over a DECADE and still no CT

Klfdesign

New Member

MARKDTN

Member

Similar threads

Donor car options for v8 conversion?

New Member

The first widely accepted Tranny

will be trying this sex one when I can find it

The first widely accepted Tranny

Been here over a DECADE and still no CT

The first widely accepted Tranny

Been here over a DECADE and still no CT

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency