ok...im gonna install gt40ps, cam, edel intake, within the next month.... after that im going with a set of gears....im not sure with which i should go with???i dont care about gas, or where my rpms are in what gear. also, how is traction with both gears?? my car is a daily driver so what gear would be the best for my setup?? thanks
dont know if to go with 373s or 390s or even 410s!! help!!
- Thread starter 96darkhorse
- Start date
DCOBRA97
Member
What is the specs on the cam? I would let that decide on the gears. for something close to stock specs then I would suggest the 3.73s. If it is going to be a cam that works in the higher rpm band then I would say the 4.10s.
I have had many stangs with gears ranging from stock 2.73s (AOD convertible.....slow....LOL) to 89GT vert 5spd with 4.10s.......a bit much for a stock motor in my opinion.
I have had many stangs with gears ranging from stock 2.73s (AOD convertible.....slow....LOL) to 89GT vert 5spd with 4.10s.......a bit much for a stock motor in my opinion.
Everyone's has a different view on this. But just a general consensis seems to be the following.
3.73's for power adders(stick)
4.10's for N/A(stick)
3.73's for cars with long highway use
4.10's for cars with short commutes
So basically, if you're car is only going to see the track and short cruises, then go with some 4.10's or higher. But if it's a daily driver 3.73's or 3.90's would be a better choice.
3.73's for power adders(stick)
4.10's for N/A(stick)
3.73's for cars with long highway use
4.10's for cars with short commutes
So basically, if you're car is only going to see the track and short cruises, then go with some 4.10's or higher. But if it's a daily driver 3.73's or 3.90's would be a better choice.
stangboy
Founding Member
I've been thinking about getting 3.90s for a while now. I think I'm gonna wait and see what my car does when I do my motor work before I make a final decision. But 3.90s seem like a good all-around gear...good for the track, highway, and in the city whereas 4.10s can be a little much for the highway. Don't get me wrong though, 3.73 are great too....I'm not complaining about mine at all.
i have had my pro 5.0 3.90s in for about a month now and i love them. not too bad on the freeway either. at loke 70mph im hittin about 2500rpms. Some people say that they whine, but its all in the installer, my gears dont whine at all. The only drawback is that there is not a correct speedo tooth gear for the 3.90s so you have to invest in a speed cal.
Similar threads
