Fox Door Skin Vs. New Door

603mustangs

Advanced Member
Sep 19, 2016
249
140
73
New Hampshire
I have an 86 with rusted out seams on the bottom of both doors. Drivers side far worse and has a dent restricting window from raising. The rest of the car is surprisingly rust free. I'd prefer to fix the problem rather than replace the door. Never replaced door skin, looking for tips from anyone who has done it, or an alternative fix.
 
I have two spare sets of doors that I keep (one coupe/hatch, one convertible) just in case I might need them in the future. Craigslist still has these pop up every now and then and usually the price is very reasonable. I would much rather unbolt the 6 bolts, unplug the three wiring harness connectors and bolt up a new (used) door than do all of the work involved in skinning a door.
 
  • Like
Reactions: Boosted92LX
Skinning a door isn't overly difficult, but like @Mstng93SSP said, it's much easier to just find a good replacement door.

Skinning a door the first time can be an ugly thing for you, it takes awhile to develop the skills to make it smooth. That said though, if you're set on this idea, you can do it. If you take your time it will come out decent too. It will involve bondo, some tack welding, panel boding adhesive, seam sealer and of course paint. In addition to the tools needed to cut the old skin off and put the new one on.

I would replace the doors if it were me.
 
Last time I showed up at a junkyard it was closed to the public for insurance reasons. They became auto dismantlers, now called auto recycling. They paid guys to dismantle and catalog everything, $40 taillights were now just shy of oem prices, so was everything, MURICA! So I haven't been back since. Do these junkyards have a network to find doors and parts over the internet?
 
Skinning a door isn't overly difficult, but like @Mstng93SSP said, it's much easier to just find a good replacement door.

Skinning a door the first time can be an ugly thing for you, it takes awhile to develop the skills to make it smooth. That said though, if you're set on this idea, you can do it. If you take your time it will come out decent too. It will involve bondo, some tack welding, panel boding adhesive, seam sealer and of course paint. In addition to the tools needed to cut the old skin off and put the new one on.

I would replace the doors if it were me.
I've heard the term "just replace the skin" more than once. "Just" sounds like it was a fairly simple job or they've never done it. What are the chances of fixing the door as is? Pulling dent and welding in new metal, that I have done, just not under door seams.
 
I've heard the term "just replace the skin" more than once. "Just" sounds like it was a fairly simple job or they've never done it. What are the chances of fixing the door as is? Pulling dent and welding in new metal, that I have done, just not under door seams.
Take dave's advice. When a body man tells you he would replace the door, that says something. Now you can 'fix' just about anything, given time and material you can do it, it can be a great learning experience. The chances of fixing the door, pretty good, the chances of it looking good, pretty good. The chances of you getting frustrated and tossing it off a three story building, probably pretty good.
It all depends on beer.
Seriously, try it. Do a good job and be proud of yourself.
 
I've heard the term "just replace the skin" more than once. "Just" sounds like it was a fairly simple job or they've never done it. What are the chances of fixing the door as is? Pulling dent and welding in new metal, that I have done, just not under door seams.
Would you mind posting a couple pictures of your door and the damage?
 
I have two spare sets of doors that I keep (one coupe/hatch, one convertible) just in case I might need them in the future. Craigslist still has these pop up every now and then and usually the price is very reasonable. I would much rather unbolt the 6 bolts, unplug the three wiring harness connectors and bolt up a new (used) door than do all of the work involved in skinning a door.
You had me at 6 bolts. I found a guy in Chester NH who is parting out 50 fox bodies from 82 to 93. He just happened to have a black 85 GT convertible with decent doors. $250 for the pair. Sold! When a body guy says get a new door, get a new door. Going there Sunday so if anyone needs something I can take pics.
 
  • Like
Reactions: Davedacarpainter