• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Interior and Upholstery Door Speakers- found suggestion to go component, not coaxial

  • Thread starter Thread starter pindude80
  • Start date Start date Apr 21, 2025
P

pindude80

Active Member
Apr 8, 2024
200
67
38
Cincinnati, OH
Apr 21, 2025
#1
  • Apr 21, 2025
  • #1
My car currently has some 6.5" door speakers that don't fit properly. I started doing some research on door speakers, to find the size needed, and found the post below.

Dash - 3.5" , Door - 6" , Rear Seat - 6" x 8" Use component speakers and put the dome tweeters and crossovers in the dash. Don't use coaxials, especially in the doors - use 6.5" woofers and trim some metal. You don't need tweeters in the back seat - use a 5.25" mid mounted on a plate. Good stereo separation happens at ear level, not at leg level. Lot's of people don't agree with this and we may hear from them.

I understand what he is saying and like the idea of the component speakers but I don't like the idea of trimming the door metal; I will have to look to see if there are 6" woofers available for the door. I'm not sure what plate he is referring to for the 5.25" mid but I can dig around; maybe a custom made plate??

I don't plan on this being a high end stereo build by any means but I kind of thought since I'm going to need door speakers I should buy decent stuff and do it right.

What are your guys opnions on what the post I found says and / or what have your speaker experiences been and / or what would be your suggestion to get something that sounds decent but not spend a lot of money.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,031
1,622
194
NJ
Apr 21, 2025
#2
  • Apr 21, 2025
  • #2
I used component Rockord 6 inch in the doors with the tweeters in the dash. No trimming and i used this backstrap stuff to mount the tweeters in the dash.

If the car has an exhaust system on it, i'm not sure it really matters what you do if you don't either have a really powerful head unit or an amplifier.
Most head units don't put out more than 25w RMS and while i'm no expert, i just don't think it's enough, it will distort before you get to a suitable driving volume.
 
P

pindude80

Active Member
Apr 8, 2024
200
67
38
Cincinnati, OH
Apr 21, 2025
#3
  • Apr 21, 2025
  • #3
2000xp8 said:
I used component Rockord 6 inch in the doors with the tweeters in the dash. No trimming and i used this backstrap stuff to mount the tweeters in the dash.

If the car has an exhaust system on it, i'm not sure it really matters what you do if you don't either have a really powerful head unit or an amplifier.
Most head units don't put out more than 25w RMS and while i'm no expert, i just don't think it's enough, it will distort before you get to a suitable driving volume.
Click to expand...
Do you know if the Rockford 6 inch componets were a "low-profile" design or anything special to where they cleared everyhing without having to do any trimming?

My car is pretty loud; it has longtubes with dumped flowmasters. I don't plan on buying a powerful head unit so what you mention about a regular headunit and distortion is a valid point.

What kind of headunit do you have? How does your sound?
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,141
21,317
234
Box behind Walmart
Apr 21, 2025
#4
  • Apr 21, 2025
  • #4
Sound?

Next, you'll be wanting cup-holders.










BTW... Take a look at the Crutchfield website. Put in your make, model, year, etc... and it will tell you what fits. From there, you have model numbers at the very least.
 
Reactions: SeaCorey
P

pindude80

Active Member
Apr 8, 2024
200
67
38
Cincinnati, OH
Apr 21, 2025
#5
  • Apr 21, 2025
  • #5
Noobz347 said:
Sound?

Next, you'll be wanting cup-holders.










BTW... Take a look at the Crutchfield website. Put in your make, model, year, etc... and it will tell you what fits. From there, you have model numbers at the very least.
Click to expand...
The reproduction console with cupholders is already on my Wishlist at LMR
 

gkomo

now i can hopefully expect to receive the shaft
Aug 2, 2024
2,195
1,438
133
San Diego, CA
Apr 21, 2025
#6
  • Apr 21, 2025
  • #6
pindude80 said:
The reproduction console with cupholders is already on my Wishlist at LMR
Click to expand...
Many (probably) of us have that cupholder console. Its great, just be aware its supposed to be painted to match. Just getting it and installing it, it won't match your interior coloring exactly. Maybe black would, but the titanium gray or whatever, doesn't.
 
P

pindude80

Active Member
Apr 8, 2024
200
67
38
Cincinnati, OH
Apr 21, 2025
#7
  • Apr 21, 2025
  • #7
gkomo said:
Many (probably) of us have that cupholder console. Its great, just be aware its supposed to be painted to match. Just getting it and installing it, it won't match your interior coloring exactly. Maybe black would, but the titanium gray or whatever, doesn't.
Click to expand...
Ok, thanks for letting me know I will need to paint it.
 

gkomo

now i can hopefully expect to receive the shaft
Aug 2, 2024
2,195
1,438
133
San Diego, CA
Apr 21, 2025
#8
  • Apr 21, 2025
  • #8
pindude80 said:
Ok, thanks for letting me know I will need to paint it.
Click to expand...
I mean mine (titanium gray interior) doesn't match, but i'm just rolling with it for now. I assume even if you painted the console it still wouldn't match exactly as existing interior pieces have faded or whatever. I'll prep and paint everything at once when the time comes.
 

AeroCoupe

lube between the nut and the face. I know my lubes
Founding Member
Oct 28, 2001
5,920
4,041
183
Claremore, OK
Apr 21, 2025
#9
  • Apr 21, 2025
  • #9
I have 6.5" Diamond Audio front components in my Coupe. I used a piece of high density particle board (want to say 1/2" or 3/4" thick) as an adapter and if fits behind the stock door panel and the woofer does not touch the grill. Can be done you just have to find ways to make it work.
 
Reactions: gkomo

2000xp8

SN Certified Technician
Aug 8, 2003
8,031
1,622
194
NJ
Apr 21, 2025
#10
  • Apr 21, 2025
  • #10
These are the ones i have.
Honestly, I'm not sure they sound any better than the stock speakers i had in the dash with sonys in the doors.
We will soon see how they work with an amp, i have the car wired up now for a 5 channel 50x4 RMS and 500x1 for the sub. Just have to swap over to the RCA cables and mount the amp.
I had taken most of the interior out to have the seatbelts rebuilt and rewebbed, while i was in there i added all the amp wiring, kilmat and new quarter windows. Kinda snowballed. My backs were already rockford 2 way 5x7.
Essentially i will be doubling the power going to the 4 speakers in the car.

https://www.crutchfield.com/S-1bxianuy451/p_575P16S/Rockford-Fosgate-P16-S.html?&XVINQ=BIF&cnxclid=17452815612950423739413821104008005
 

Mindseye007

10 years still blowing strong
5 Year Member
Oct 21, 2020
579
135
63
ontario
Apr 26, 2025
#11
  • Apr 26, 2025
  • #11
pindude80 said:
My car currently has some 6.5" door speakers that don't fit properly. I started doing some research on door speakers, to find the size needed, and found the post below.

Dash - 3.5" , Door - 6" , Rear Seat - 6" x 8" Use component speakers and put the dome tweeters and crossovers in the dash. Don't use coaxials, especially in the doors - use 6.5" woofers and trim some metal. You don't need tweeters in the back seat - use a 5.25" mid mounted on a plate. Good stereo separation happens at ear level, not at leg level. Lot's of people don't agree with this and we may hear from them.

I understand what he is saying and like the idea of the component speakers but I don't like the idea of trimming the door metal; I will have to look to see if there are 6" woofers available for the door. I'm not sure what plate he is referring to for the 5.25" mid but I can dig around; maybe a custom made plate??

I don't plan on this being a high end stereo build by any means but I kind of thought since I'm going to need door speakers I should buy decent stuff and do it right.

What are your guys opnions on what the post I found says and / or what have your speaker experiences been and / or what would be your suggestion to get something that sounds decent but not spend a lot of money.
Click to expand...
In my 91 coupe, I have these installed

Kicker DSC680 Coaxial 200W Car Speakers, 6-in x 8-in in the trunk, with​

Kicker DSC6504 DS Series Car Speakers, 240W, 6.5-in in the doors and​

​

Pioneer TS-A878 60W Max Custom Fit 2-Way Car Speaker, Pair, 3.5-in in the dash all powered off a double din Kenwood deck no amps and it sounds amazing.​

 

Attachments

  • kicker-dsc680-6-x-8-4-ohm-coaxial-speakers-0577db96-5f79-41ec-bf64-f0997fdf0581.webp
    133.2 KB · Views: 95
  • kicker-6-5-240w-speakers-with-5-tweeters-01cb7be9-b0aa-40a8-a0da-0ef392ff951a-jpgrendition.webp
    158.4 KB · Views: 95
  • pioneer-3-5-custom-fit-speaker-7c602f9c-6612-4c46-9be7-178da6696ad7-jpgrendition.webp
    94.5 KB · Views: 126
P

pindude80

Active Member
Apr 8, 2024
200
67
38
Cincinnati, OH
Apr 28, 2025
#12
  • Apr 28, 2025
  • #12
9TY1LXCOUPE5.0 said:
In my 91 coupe, I have these installed

Kicker DSC680 Coaxial 200W Car Speakers, 6-in x 8-in in the trunk, with​

Kicker DSC6504 DS Series Car Speakers, 240W, 6.5-in in the doors and​

​

Pioneer TS-A878 60W Max Custom Fit 2-Way Car Speaker, Pair, 3.5-in in the dash all powered off a double din Kenwood deck no amps and it sounds amazing.​

Click to expand...
Thanks for the post, brand name, model of speakers, and letting me know how they sound. I will look at the speakers you posted. I imagine my rear speakers might be different since my car is a hatch.

Did the door speakers mount easily or did you have to use any adapters or cut the doors to accept them?
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,031
1,622
194
NJ
Apr 28, 2025
#13
  • Apr 28, 2025
  • #13
I don't think a hatch to a notch is apples to apples comparison.
Not sure if your car is a hatch or a notch, but if it's a hatch, i still don't believe anything less than 50w rms is enough for the stock location speakers.
There are head units (i think) that go that high, but i didn't see many.

I added a kenwood x802 5 channel i got on ebay manufacturer refurbished for just over $200 (they also have them on amazon, but you can't make an offer). It's a couple models years old, but i don't think it matters.
Made my stereo sound 250% better.

Before if i ran it in the garage, car off, it sounded tolerable.
Car running, it was distorted before it hit a suitable volume.
While driving, the stereo was pointless to use.
Now i can run it at a volume higher than i actually want to subject my kids to and the subwoofer adds bass, which is almost impossible to get out of hatch with stock location speakers.

I don't think 1/2 in difference in speakers in the door really matter and I personally don't think people need speakers in the doors or back seat need to handle 250w. If you want to use the front speakers you have, do like aero did and make a plate that just brings them out a little bit, if you don't feel like it, just buy speakers .5 inch smaller.
 

Mindseye007

10 years still blowing strong
5 Year Member
Oct 21, 2020
579
135
63
ontario
Apr 28, 2025
#14
  • Apr 28, 2025
  • #14
pindude80 said:
Thanks for the post, brand name, model of speakers, and letting me know how they sound. I will look at the speakers you posted. I imagine my rear speakers might be different since my car is a hatch.

Did the door speakers mount easily or did you have to use any adapters or cut the doors to accept them?
Click to expand...
No they all fit like a glove and mounted perfect in the stock locations. I was so happy they fit the doors no drilling or any thing they just fit perfectly.
 
You must log in or register to reply here.

Similar threads

Radio, Speaker Upgrades
  • TripleYellow
  • Apr 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
142
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 24, 2026
TripleYellow
S
Stereo snakes nest; what am I missing?
  • Scott_S
  • Aug 29, 2025
  • Mustang Sound & Shine All
Replies
3
Views
370
Mustang Sound & Shine All Sep 24, 2025
Scott_S
S
Run a 5 channel or use head unit and mono amp for sub?
  • 2000xp8
  • Sep 20, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 23, 2024
2000xp8
G
Help! Radio, door chime fuse keeps blowing.
  • goofyfoot53
  • Sep 9, 2025
  • 2.3L (N/A & Turbo) Tech
Replies
1
Views
299
2.3L (N/A & Turbo) Tech Sep 9, 2025
91AOD5.0LX
2
Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
284
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
2000ElectricGreen
2
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?